Loading…
Loading…
Name | ID | Label | Description | Type | Access | Class |
---|---|---|---|---|---|---|
user_password | 4067 | New User Password | User password required to change parameter settings from keypad. | R/W | Unsigned | 2048 |
delta_T | 4068 | Delta T | Delta T - Displays the set point temperature which the TA2 is controlling. Useful for diagnostics information. | R | Float | 2050 |
heater_setting | 4069 | Heater Setting | Heater Setting - Displays a value for the heater setting. Useful for diagnostics information. | R | Unsigned | 2050 |
heater_cal_setting | 406A | Heater Cal Setting | Heater setting for calibration | R/W | Unsigned | 2048 |
install_factor_A | 4038 | A | Install Factors - A, B, C; Install Factors are utilized in situations when the measured flow rate may need to be adjusted due to variations in flow profile or other installation factors. The Install Factors are the coefficients of the polynomial equation: Corrected Flow = A + Bx + Cx^2 where x is the flow measured by the TA2 in PV units. | R/W | Float | 2048 |
install_factor_B | 4039 | B | Install Factors - A, B, C; Install Factors are utilized in situations when the measured flow rate may need to be adjusted due to variations in flow profile or other installation factors. The Install Factors are the coefficients of the polynomial equation: Corrected Flow = A + Bx + Cx^2 where x is the flow measured by the TA2 in PV units. | R/W | Float | 2048 |
install_factor_C | 403B | C | Install Factors - A, B, C; Install Factors are utilized in situations when the measured flow rate may need to be adjusted due to variations in flow profile or other installation factors. The Install Factors are the coefficients of the polynomial equation: Corrected Flow = A + Bx + Cx^2 where x is the flow measured by the TA2 in PV units. | R/W | Float | 2048 |
stp_temperature | 406B | STP Temperature | STP Temperature - permit the user to modify STP conditions to application specific requirements. Enter temperature used for Standard Temperature. | R/W | Float | 2048 |
sensor_type | 4045 | Sensor Type | Sensor Type - Type of sensor used for probe calibration at factory. | R/W | Enum | 2048 |
To | 406C | To | To - Probe calibration factor. | R/W | Integer | 2048 |
Name | ID | Label | Description | Type | Access | Class |