Loading…
Name ID Label Description Type Access Class
statusinfo_5 4065 Incmp Targ Rej Incomplete Target Rejection - False target only partially captured; re-run False Target Rejection routine. R Enum 2050
statusinfo_6 4066 Scatter Target Scattered Target - Return signals scattered due to turbulence in vessel. R Enum 2050
statusinfo_7 4067 Uncertn Target Uncertain Target - Target is missing, but not determined to be lost; device is holding last valid value while confirming the target position, will continue based upon the LOE Delay value, consult Factory if problem persists. R Enum 2050
statusinfo_8 4068 DC Noise DC Noise - Excessive noise on A/D channel; consult Factory. R Enum 2050
statusinfo_9 4069 Signal Too Hi Signal Too High - Level signal amplitude is excessive; choose higher Dielectric range, reduce Turbulence or Foam settings, consult Factory if problem persists. R Enum 2050
statusinfo_10 406A Signal Too Low Signal Too Low - Level signal amplitude is insufficient; choose lower Dielectric range, increase Turbulence or Foam settings, consult Factory if problem persists. R Enum 2050
statusinfo_11 406B Info 0800 R Enum 2050
statusinfo_12 406C IPC Bus IPC Bus - Internal communications error; consult Factory. R Enum 2050
statusinfo_13 406D IPC Checksum IPC Checksum - Internal communications error; consult Factory. R Enum 2050
statusinfo_14 406E IPC Length IPC Length - Internal communications error; consult Factory. R Enum 2050
Name ID Label Description Type Access Class