Loading…
Name ID Label Description Type Access Class
comm_status 0098 Communication status Communications Error Summary- The Field Device has detected the following error condition while attempting to receive the Host request. Therefore the Command was not accepted, and the Host request caused no change to occur in the Field Device. R BitEnum 131
request_preambles 009B Num req preams Number of Preambles required from the Host request by the Field Device. R Unsigned 128
universal_revision 009C Universal Revision Revision of the Universal Device Description, to which the Field Device conforms. R Unsigned 128
transmitter_revision 009D Fld dev rev Revision of the Field Device Specific Device Description, to which the Field Device conforms. R Unsigned 128
software_revision 009E Software rev This revision corresponds to the software or firmware that is embedded in the Field Device. R Unsigned 2048
hardware_revision 009F Hardware rev Hardware Revision- Revision that corresponds to the electronics hardware of the Field Device. R Unsigned 2048
device_id 00A1 Device ID Uniquely identifies the Field Device when combined with the Manufacturer Identification and Device Type. Therefore, this variable cannot be modified by the Host user. R Unsigned 2048
response_preambles 0FE2 Num resp preams Number of Response Preambles- Number of Preambles to be sent in the response message from the Field Device to the Host R Unsigned 128
max_num_device_variables 00CE Max dev vars Maximum Number of Device Variables- This indicates the last Device Variable code that a host application should expect to be found in the field device (e.g., when identifying the Device Variables using Command 54) R Unsigned 2048
config_change_counter 00CF Cfg chng count Indicates the number of times the device's configuration or calibration has been changed by a host application or from a local operator interface. R Unsigned 2050
Name ID Label Description Type Access Class