Loading…
Name ID Label Description Type Access Class
FlowPt29 4886 Point 29 Flow Custom table level entry corresponding to Point 29 Head. R/W Float 2048
FlowPt30 4887 Point 30 Flow Custom table level entry corresponding to Point 30 Head. R/W Float 2048
CompMode 47CD Compensation Mode Allows for special compensation. (Choices are None, Manual, and Automatic). Default setting is suitable for most installations. Contact Technical Support before adjusting. R/W Enum 2048
ProbeTargetMode 4888 Probe Target Mode Run mode enables automatic steam compensation. Cal mode allows calibration of target through air; Off mode disables automatic compensation. Default setting is suitable for most installations. Refer to I & O manual before adjusting. R/W Enum 8
TargetCalTicks 4889 Targ Calib Ticks Factory parameter. Displayed for diagnostic purposes only. R/W Integer 8
VaporApparentDielectric 488A Vapor Measured Diel The vapor dielectric constant as calculated by the transmitter. Displayed for diagnostic purposes only. R Float 10
TargetStrength 488B Target Strength Relative amplitude of the Steam Target. Displayed for diagnostic purposes only. R Unsigned 10
TargetTicks 488C Target Ticks Relative location of Steam Target. Displayed for diagnostic purposes only. R Integer 10
M7YK_Corr 488D 7YK Scale Offset For 7YK probes, enter distance correction in mm. Value entered at factory is suitable for most installations. Refer to I & O manual before adjusting. R/W Integer 8
BuildupDetectMode 488E Buildup Detection Allows for configuration of the Probe Buildup option. This option offers the user a way to program the transmitter such that it will give a proactive indication of probe buildup. This will allow the user the ability to perform a probe inspection and cleaning during the next convenient shutdown. R/W Enum 2049
Name ID Label Description Type Access Class