Loading…
Name ID Label Description Type Access Class
SlopedEndDistance 46A6 Sloped End Distance Location of the end of the sloped threshold. Default setting is suitable for most installations. Refer to I & O manual before adjusting. R/W Float 2048
VaporDielectric 47CC Vapor Dielectric For manual compensation mode, the value entered is used as the dielectric constant of the vapor. (Range is 1.0 to 10). R/W Float 2048
UprDielectric 47CE Upr Dielectric For interface mode, the value entered is used as the dielectric constant of the upper liquid medium. (Range is 1.2 to 10). R/W Float 2048
IfcThreshMode 47CF Ifc Lvl Thresh Mode Selects signal threshold control for measuring liquid-liquid interface level. Use 'Automatic' for sensing transition from lower to higher dielectric liquids. R/W Enum 2048
IfcThreshValue 46A7 Ifc Lvl Thresh Value Relative setting of the threshold for detecting interface level. Default setting is suitable for most installations. Refer to I & O manual before adjusting. R/W Unsigned 2048
EOPThreshMode 47D0 EoP Thresh Mode Threshold for detecting an End of Probe signal. Default setting is suitable for most installations. Refer to I & O manual before adjusting. R/W Enum 2048
EOPThreshValue 46A8 EoP Thresh Value Relative setting of the threshold for detecting end of probe. Default setting is suitable for most installations. Refer to I & O manual before adjusting. R/W Unsigned 2048
Fid_Gain 47D1 Fiducial Gain Factory parameter. Displayed for diagnostic purposes only. R/W Unsigned 2048
HF_Cable 47D2 HF Cable Length Default setting is suitable for most installations. Refer to I & O manual before adjusting. R/W Enum 2048
LvlThreshValue 46A5 Lvl Thresh Value Relative setting of the threshold for detecting level. Default setting is suitable for most installations. Refer to I & O manual before adjusting. R/W Unsigned 2048
Name ID Label Description Type Access Class