Loading…
Name ID Label Description Type Access Class
MagnetrolSSN 4025 Magnetrol S/N Magnetrol S/N - Serial number of this unit. R/W ASCII 2052
Initials 4026 Date/Time/Initials When and by whom calibration was performed. R/W PackedAscii 2052
FirmwareVersion 4027 Firmware Version ﾌｨｰﾙﾄﾞ機器ｿﾌﾄｳｪｱ ﾚﾋﾞｼﾞｮﾝ - これはｿﾌﾄｳｪｱ又はﾌｧｰﾑｳｪｱのﾚﾋﾞｼﾞｮﾝのことで, ﾌｨｰﾙﾄﾞ機器に書込まれています。 R ASCII 2052
ConversionFactor 4028 Conversion Factor Factory parameter, displayed for diagnostic purposes only. R/W Integer 8
ScaleOffset 4029 Scale Offset Factory parameter, displayed for diagnostic purposes only. R/W Integer 8
WaveformSelect 402A Waveform Selection Factory parameter, displayed for diagnostic purposes only. R/W Enum 2048
BlockingDist 402B Blocking Distance Distance below the reference point within which level is not sensed. Operation when the liquid level is within the blocking distance is undefined. R/W Float 2048
NegThreshAmpl 402C Neg Threshold Ampl Threshold for detecting level. Default setting is suitable for most installations. Refer to I & O manual before adjusting. R/W Unsigned 2048
PosThreshAmpl 402D Pos Threshold Ampl Threshold for detecting end of probe. Default setting is suitable for most installations. Refer to I & O manual before adjusting. R/W Unsigned 2048
IfcThreshAmpl 402E Ifc Threshold Ampl Threshold for detecting liquid-liquid interface. Default setting is suitable for most installations. Refer to I & O manual before adjusting. R/W Unsigned 2048
Name ID Label Description Type Access Class