Loading…
Name ID Label Description Type Access Class
IfcThreshold 402F Intrface Threshold Selects signal threshold control for measuring liquid-liquid interface level. Use 'CFD' for sensing transition from lower to higher dielectric liquids. R/W Enum 2048
UprDielectric 4030 Upper Dielectric For manual compensation, the value entered is used as the dielectric constant of the vapor phase above a single liquid medium. For interface mode, the value entered is used as the dielectric constant of the upper liquid medium. R/W Float 2048
CompMode 4031 Compensation Mode Compensation is limited to None in interface mode. Manual uses the upper dielectric to compensate for a vapor phase above the liquid. Automatic is available only with a targeted probe. Default setting is suitable for most installations. Refer to I & O manual before adjusting. R/W Enum 2048
M7xK_Corr 4032 7xK Correction For 7xK probes, enter distance correction in mm. Value entered at factory is suitable for most installations. Refer to I & O manual before adjusting. R/W Integer 8
FidTicks 4033 Fiducial Ticks Displayed for diagnostic purposes only. R Unsigned 2051
UprLvlTicks 4034 Level Ticks Displayed for diagnostic purposes only. R Unsigned 34
IfcLvlTicks 4035 Interface Ticks Displayed for diagnostic purposes only. R Unsigned 34
IfcMedium 4036 Interface Medium Characteristic of liquid(s) sensed by probe in interface measurement mode. R Enum 2051
FidSpread 4037 Fiducial Spread Displayed for diagnostic purposes only. R Unsigned 2051
Signal 4038 Signal Strength Displayed for diagnostic purposes only. R Unsigned 2051
Name ID Label Description Type Access Class