Loading…
Name ID Label Description Type Access Class
FirmwareVersion 4027 Firmware Version Revisão do Software do dispositivo de campo – Essa revisão corresponde ao software ou firmware, que está incorporado no dispositivo de campo R ASCII 2052
ConversionFactor 4028 Conversion Factor Factory parameter, displayed for diagnostic purposes only. R/W Integer 8
ScaleOffset 4029 Scale Offset Factory parameter, displayed for diagnostic purposes only. R/W Integer 8
WaveformSelect 402A Waveform Selection Factory parameter, displayed for diagnostic purposes only. R/W Enum 2048
BlockingDist 402B Blocking Distance Distance below the reference point within which level is not sensed. Operation when the liquid level is within the blocking distance is undefined. R/W Float 2048
NegThreshAmpl 402C Neg Threshold Ampl Threshold for detecting level. Default setting is suitable for most installations. Refer to I & O manual before adjusting. R/W Unsigned 2048
PosThreshAmpl 402D Pos Threshold Ampl Threshold for detecting end of probe. Default setting is suitable for most installations. Refer to I & O manual before adjusting. R/W Unsigned 2048
IfcThreshAmpl 402E Ifc Threshold Ampl Threshold for detecting liquid-liquid interface. Default setting is suitable for most installations. Refer to I & O manual before adjusting. R/W Unsigned 2048
IfcThreshold 402F Intrface Threshold Selects signal threshold control for measuring liquid-liquid interface level. Use 'CFD' for sensing transition from lower to higher dielectric liquids. R/W Enum 2048
UprDielectric 4030 Upper Dielectric For manual compensation, the value entered is used as the dielectric constant of the vapor phase above a single liquid medium. For interface mode, the value entered is used as the dielectric constant of the upper liquid medium. R/W Float 2048
Name ID Label Description Type Access Class