Loading…
Name ID Label Description Type Access Class
vol_set20mA 4013 Vol 20mA Set Point URV (ｱｯﾊﾟｰ ﾚﾝｼﾞ ﾊﾞﾘｭｰ) - ｱﾅﾛｸﾞ出力に対するｵﾍﾟﾚｰｼｮﾝ上のｴﾝﾄﾞ ﾎﾟｲﾝﾄのことで, ﾊﾟｰｾﾝﾄ ﾚﾝｼﾞの 100% に相当します。 R/W Float 64
sensor_serial_number 4014 ｾﾝｻｰ S/N R Unsigned 2048
ProbeModel 4015 Probe Model Type of probe connected to transmitter as shown on the probe nameplate. R/W Enum 2048
ProbeLength 4016 Probe Length Distance from face of process seal to end of probe. R/W Float 2048
LevelOffset 4017 Level Offset Desired level reading when liquid surface is at end of probe. R/W Float 2048
DielRange 4018 Dielectric Range Selects the range bounding the dielectric constant of the medium in vessel. For interface measurement mode, it selects the range bounding the dielectric constant of the lower liquid medium. Some ranges may not be selectable depending on the probe model. R/W Enum 2048
ProbeMount 4019 Probe Mount Mounting style of probe fitting. R/W Enum 2048
TrimLevel 401A Trim Level Trim Level is an offset value to be used to force the transmitter to output the exact Level. This should only be used after all parameters have been entered correctly, and it has been confirmed that the transmitter is tracking the correct level. R/W Float 2048
MeasType 401B Measurement Type Selection of Measurement Type may be constrained by the probe model. R/W Enum 2048
UserPassword 401C New User Password Password required to change user parameter settings from keypad. R/W Unsigned 2048
Name ID Label Description Type Access Class