Loading…
名称 ID 标签 描述 类型 访问 分类
ProbeLength 400F Probe Length Distance from face of process seal to end of probe 读/写 浮点 2048
ProbeOffset 4010 Probe Offset Desired level reading when liquid surface is at end of probe 读/写 浮点 2048
LevelTrim 4011 Level Trim Fixed amount added to measurement to adjust level reading 读/写 浮点 2048
SensitivityDielectric 4012 读/写 枚举 2048
Set4mA 400D 4mA Set Point 模拟量输出下端点值——定义正常工作条件下每个模拟量输出的下端点。 读/写 浮点 64
Set20mA 400C 20mA Set Point 模拟量输出上端点值——定义正常工作条件下每个模拟量输出的上端点。 读/写 浮点 64
Fault 4009 Fault State 模拟量输出报警类型——定义当现场设备检测到模拟量输出可能未跟踪关联现场设备变量时模拟量输出响应的方式。注意——数值表示可能不确定。 读/写 枚举 65
Deadband 4013 Deadband Distance along probe where instrument begins sensing level of material in vessel. Default setting suitable for most installations. Refer to I & O manual before adjusting. 读/写 浮点 2048
Threshold 4014 Threshold Use 'CFD' except in situation with low dielectric (< 10) material over high dielectric (> 10), e.g. oil over water 读/写 枚举 2048
Initials 4015 Date/Time/Initials When and by whom calibration was performed 读/写 压缩文本 2052
名称 ID 标签 描述 类型 访问 分类