Loading…
Name ID Label Description Type Access Class
Set4mA 400D 4mA Set Point Analog Output Lower Endpoint Value- Defines the lower endpoint, of the respective Analog Output, for normal operating conditions R/W Float 64
Set20mA 400C 20mA Set Point Analog Output Upper Endpoint Value- Defines the upper endpoint, of the respective Analog Output, for normal operating conditions R/W Float 64
ProbeOffset 400F Probe Offset Distance from low end of probe to 0 level reference. Negative offset indicates low end of probe is below the 0 level reference. Positive offset indicates low end of probe is above the 0 level reference. R/W Float 2048
Fault 4009 Fault State Analog Output Alarm Type- Defines how the Analog Output will respond when the Field Device detects that the Analog Output may not be tracking the associated Field Device Variable. NOTE- The Digital Value representation may not be determinate. R/W Enum 65
Initials 4010 Date/Time/Initials When and by whom calibration was performed R/W PackedAscii 2052
Trim4mA 4011 4mA Trim Value Factory parameter, displayed for diagnostic purposes only R Unsigned 2050
Trim20mA 4012 20mA Trim Value Factory parameter, displayed for diagnostic purposes only R Unsigned 2050
EnteredPassword 4013 Enter Password Password is required for adjusting Factory Settings W Unsigned 2052
MagnetrolSSN 4014 Magnetrol S/N Factory parameter, displayed for diagnostic purposes only R/W PackedAscii 2052
sensor_serial_number 4005 PV Snsr s/n R Unsigned 2048
Name ID Label Description Type Access Class