Loading…
Loading…
| Name | ID | Label | Description | Type | Access | Class |
|---|---|---|---|---|---|---|
| EnteredPassword | 4027 | Enter Password | Password entry is required to modify parameters that should normally not be accessible to the user. | W | Unsigned | 2052 |
| MagnetrolSSN | 4028 | Magnetrol S/N | Magnetrol S/N - Serial number of this unit. | R/W | ASCII | 2052 |
| Trim4mA | 4029 | 4mA Trim Value | Displayed for diagnostic purposes only. | R | Unsigned | 2051 |
| Trim20mA | 402A | 20mA Trim Value | Displayed for diagnostic purposes only. | R | Unsigned | 2051 |
| ConversionFactor | 402B | Conversion Factor | Factory parameter, displayed for diagnostic purposes only. | R | Integer | 10 |
| ScaleOffset | 402C | Scale Offset | Factory parameter, displayed for diagnostic purposes only. | R | Integer | 10 |
| Initials | 402D | Date/Time/Initials | When and by whom calibration was performed. | R/W | PackedAscii | 2052 |
| FirmwareVersion | 402E | Firmware Version | Версия ПО полевого устройства - это версия ПО или встроенного ПО полевого устройства | R | ASCII | 2052 |
| CalibSelect | 402F | Calibration Selected | Calibration selected to calculate the measured process variable. User can select the Factory Calibration or User Calibration. If User Calibration is selected, refer to User Wet Calib Menu to calibrate the unit under process conditions. | R/W | Enum | 2048 |
| Adj_SnrCalLo | 4030 | Adj SensorCalLo | Factory parameter, displayed for diagnostic purposes only. | R | Float | 10 |
| Name | ID | Label | Description | Type | Access | Class |