Loading…
Name ID Label Description Type Access Class
MeasureMinimumUTP 4024 Pres Min upper trim Minimum Upper Trim Point- The lowest applied process value that can be used duirng a high trim procedure (ie, no value lower than this will be accepted by the instrument). R Float 0
MeasureMaximumUTP 4025 Pres Max upper trim Maximum Upper Trim Point- The highest applied process value that can be used duirng a high trim procedure (ie, no value higher than this will be accepted by the instrument). R Float 0
MeasureMinimumTrimDiff 4026 Pres Min trim diff Minimum Trim Differential- The minimum acceptable difference between the upper and lower trim points. R Float 0
distance_dig_value 4027 Distance R Float 10
DistancePDQ 4028 PDQ Process Data Quality 'PDQ' - Indicates the overall process data quality of the device variable value. R Enum 10
DistanceLS 4029 LS Limit Status 'LS' - Indicates whether the device variable is limited (i.e., not responding to a process). R Enum 10
DistanceStatus 402A Distance Fmly stat Device Family Status- Indicates additional status information on a device variable for a specific device family. R BitEnum 10
DistanceClassification 402B Level Class Classification- Indicates the unit code expansion table used for a particular dynamic or device variable. R Enum 0
Distance_usl 402C USL Upper Sensor Limit Value- Defines the maximum usable value for the Upper Range Value. R Float 0
Distance_lsl 402D LSL Lower Sensor Limit Value- Defines the minimum usable value for the Lower Range Value. R Float 0
Name ID Label Description Type Access Class