Loading…
Loading…
Name | ID | Label | Description | Type | Access | Class |
---|---|---|---|---|---|---|
uniViscosity | 40BC | Viscosity | R | Enum | 2048 | |
flCompressibilityFactorFluid | 40BD | Compressibility | Compressibility factor; specifies the deviation between the real gas and ideal gas. | R | Float | 2048 |
enuLimitSwitch | 40C3 | R/W | Index | 4096 | ||
enuB1Function | 40C7 | Actual function (B1) | Switchpoint actual function; specifies the allocation for the binary output B1 (inactive / limitswitch primary measurement / limitswitch totalizer / pulse output*) (* The pulse output is only available in case of an IO module). | R/W | Enum | 32 |
flB1FlowLimit | 40C9 | PV switch-point (B1) | PV switch point limit; range 0.0 ... upper range value, if current primary measurement exceeds the appointed switchpoint, the output changes the binary status. | R/W | Float | 32 |
flB1FlowHysteresis | 40CB | PV switch-point hysteresis (B1) | PV switch point hysteresis; range 0.0 ... switchpoint, if current primary measurement exceeds the appointed switchpoint, the output changes the binary status. To return to initial position, the switchpoint value reduced by the hysteresis must be under-run. | R/W | Float | 32 |
flB1TotalizerLimit | 40CE | Totalizer switch-point (B1) | SV switchpoint limit; range 0.0 ... totalizer limit, if the current totalizer value exceeds adjusted limit switch value, the output changes the binary status. There is no hysteresis adjustment for this switchpoint. | R/W | Float | 32 |
enuB1ContactType | 40D1 | Type of contact (B1) | Switchpoint type of contact; the binary limit switch output can be assigned to normally closed contact or normally open contact. | R/W | Enum | 2048 |
enuB2Function | 40D3 | Actual function (B2) | Switchpoint actual function; specifies the allocation for the binary output B2 (inactive / limitswitch primary measurement / limitswitch totalizer / pulse output*) (* The pulse output is only available in case of an IO module). | R/W | Enum | 32 |
flB2FlowLimit | 40D4 | PV switch-point (B2) | PV switch point limit; range 0.0 ... upper range value, if current primary measurement exceeds the appointed switchpoint, the output changes the binary status. | R/W | Float | 32 |
Name | ID | Label | Description | Type | Access | Class |