Loading…
Name ID Label Description Type Access Class
shape 402B Shape The SHAPE function will be set based on the mounting configuration. Like the GAIN function it is designed to create the best signal to noise ratio from the return pulse. The SHAPE setting will determine how the signal is amplified. R/W Enum 2048
unused_flag 402C R/W Unsigned 0
level_pv 402D PV LEVEL PV is a function which allows the user to determine which variable the OUTPUT of the MT5100 will be based upon. Selections for OUTPUT are Total and Interface. Total and Interface are the actual linear measurements the MT5100 is interpreting from its configuration. Total is the top level of all liquids and Interface is the level of the lower liquid in the vessel. R/W Enum 2048
measure_mode 402E Measure Mode The MT5xxx can be used to measure Media Level or Ullage. Media Level refers to a Level Measurement from the end of the probe to the surface of the product level. Said differently, it is measuring the amount of product in the tank. 2Ullage refers to a Level Measurement from the face of the sensor to the surface of the product being measured. Said differently, it is measuring the amount of vapor space in the tank. 2Factory default the MEASURE MODE will be Media Level. Media Level = Level in the tank Ullage = vapor space in the tank R/W Enum 2048
avail_levels 402F Available Levels R Enum 2048
xmitter_status_0 4030 Device Status Bits 0 R BitEnum 3
password_entered 4031 R/W Integer 4096
password_ascii 4032 Access to Extended Parameters R/W Password 4096
raw_level 4033 Raw Level Raw Level- The raw count measured for the total level R Unsigned 2050
actual_level 42B4 If the UPPER DIELECTRIC is not known, the ACTUAL INTERFACE level can be entered into this menu item and the UPPER DIELECTRIC will be reverse calculated. The ACTUAL INTERFACE will be measured from the end of the probe in the selected UNITS. W Float 2048
Name ID Label Description Type Access Class