Loading…
Name ID Label Description Type Access Class
actual_interface 42B5 W Float 2048
raw_interface 42B6 Raw Interface Raw Interface - The raw count measured for the interface R Unsigned 2050
alarm_delay 4034 Alarm Delay R/W Float 2048
sw_revision_str 404E Software Version R ASCII 2048
lin_table_input_index 404F R Index 4096
lin_table_point 4051 W Unsigned 2048
lin_units 4011 Linearization Units LIN UNITS allows the selection of the desired output UNITS for the linearization table. LIN UNITS can be in Level, %, Volume or Flow units. Please see the Installation & Maintenance Manual or menu contents for unit options. R/W Enum 2048
lin_mode 4052 Linearization Mode Determines how the values in the table will be assigned; either by entering the input values manually or by raising the tank level and entering the values automatically. - Manual Mode allows the entry of the input values along with the desired respective output level. - Automatic mode requires the level of the product to be at the measured level when the respective output value is set. NOTE: Manual mode will produce a more exact linearization profile compared to Automatic mode. R/W Enum 2048
lin_minimum 4053 Linearization Minimum The value assigned to the lowest measurable point along the PROBE LENGTH. Typically this will be set to 0, although it is not required. R/W Float 2048
lin_maximum 4054 Linearization Maximum The value assigned to the highest measurable point along the PROBE LENGTH. This value must be greater than the largest value entered in the Linearization Table. R/W Float 2048
Name ID Label Description Type Access Class