Loading…
Name ID Label Description Type Access Class
cPresUnits_cmd3 4154 Pressure Unit from command 3 Pressure Unit for sv- The actual pressure reported by the SVI II AP can be in psi, bar or kPa(for sv) R/W Enum 8
cPosUnits 40AD Position Unit Position Unit- Unit for valve position R Enum 10
cSwitch1Dir 407D DO Switch 1 Normally Define Switch 1 is normally closed or open. R/W Enum 8
cSwitch2Dir 4080 DO Switch 2 Normally Define Switch 2 is normally closed or open. R/W Enum 8
cSwitch1Type 407C DO Switch 1 Action Define Switch 1 action. R/W Enum 8
cSwitch2Type 407F DO Switch 2 Action Define Switch 2 action. R/W Enum 8
cSwitch1PosLimit 4159 R/W Enum 4096
cSwitch2PosLimit 415A R/W Enum 4096
fSwitch1Value 407E DO Switch 1 Value The value is set for Position Low / Upper Limits.( Switch 1 Value must be between 0 and 200. ) Attention: This is valid under the condition of switch 1 type is Posistion Low/High Limit ), but to some host, like SDC-625, to activate this field maybe need to close / open this page again. R/W Float 8
fSwitch2Value 4081 DO Switch 2 Value The value is set for Position Low / Upper Limits.( Switch 2 Value must be between 0 and 200. ) Attention: This is valid under the condition of switch 2 type is Posistion Low/High Limit, but to some host, like SDC-625, to activate this field maybe need to close / open this page again. R/W Float 8
Name ID Label Description Type Access Class