Loading…
Loading…
Name | ID | Label | Description | Type | Access | Class |
---|---|---|---|---|---|---|
burst_mode_select | 0FFF | Burst mode | Burst Mode Select- Selects the mode for the Burst Mode functionality. If Burst is enabled the Field Device will generate HART messages on the Link without individual requests from the Host. | R/W | Enum | 128 |
burst_message_trigger_mode | 08D8 | Burst Msg Trigger Mode | R/W | Enum | 128 | |
event_status | 08D9 | Event Status | R | BitEnum | 130 | |
event_notification_control_n | 08DA | Event Notification Control | R/W | Enum | 128 | |
device_status_mask | 08DB | Device Status Mask | R/W | BitEnum | 2048 | |
extended_fld_device_status_mask | 08DC | Ext dev status Mask | R/W | BitEnum | 2048 | |
standardized_status_0_mask | 08DD | Device Diagnostic Status 0 Mask | R/W | BitEnum | 2048 | |
standardized_status_1_mask | 08DE | Device Diagnostic Status 1 Mask | R/W | BitEnum | 2048 | |
standardized_status_2_mask | 08DF | Device Diagnostic Status 2 Mask | R/W | BitEnum | 2048 | |
standardized_status_3_mask | 08E0 | Device Diagnostic Status 3 Mask | R/W | BitEnum | 2048 | |
analog_channel_saturated1_mask | 08E1 | AO saturated Mask | R/W | BitEnum | 2048 | |
analog_channel_fixed1_mask | 08E2 | AO fixed Mask | R/W | BitEnum | 2048 | |
device_status_latched_value | 08E3 | Latched Device Status | W | BitEnum | 2049 | |
dev_operating_mode_mask | 08F9 | Operate mode Mask | R/W | BitEnum | 2048 | |
extended_fld_device_status_latched_value | 08E4 | Latched Ext dev status | W | BitEnum | 2049 | |
standardized_status_0_latched_value | 08E5 | Latched Device Diagnostic Status 0 | W | BitEnum | 2049 | |
standardized_status_1_latched_value | 08E6 | Latched Device Diagnostic Status 1 | W | BitEnum | 2049 | |
standardized_status_2_latched_value | 08E7 | Latched Device Diagnostic Status 2 | W | BitEnum | 2049 | |
standardized_status_3_latched_value | 08E8 | Latched Device Diagnostic Status 3 | W | BitEnum | 2049 | |
analog_channel_saturated1_latched_value | 08E9 | Latched AO saturated | W | BitEnum | 2049 | |
analog_channel_fixed1_latched_value | 08EA | Latched AO fixed | W | BitEnum | 2049 | |
dev_operating_mode_latched_value | 08FA | Latched Operate Mode | W | Enum | 2049 | |
lock_device_code | 106F | Lock dev code | Código de bloqueo del dispositivo: Indica si el dispositivo se ha colocado en posición de bloqueo para evitar que se hagan cambios manualmente o desde otro maestro. | W | Enum | 2048 |
lock_device_status_code | 1070 | Lock dev status | Código de bloqueo del dispositivo: Indica si el dispositivo se ha colocado en posición de bloqueo para evitar que se hagan cambios manualmente o desde otro maestro. | R | BitEnum | 2048 |
response_code | 0096 | Response code | Command Specific Response Code- Data that is returned in the Field Device response, that indicates the relative success of the Command sent in the Host request. This information may relate to the Data of the Host request or to the command itself. | R | Enum | 129 |
comm_status | 0098 | Communication status | Communications Error Summary- The Field Device has detected the following error condition while attempting to receive the Host request. Therefore the Command was not accepted, and the Host request caused no change to occur in the Field Device. | R | BitEnum | 131 |
request_preambles | 009B | Num req preams | Number of Request Preambles- Number of Preambles required from the Host request by the Field Device | R | Unsigned | 128 |
universal_revision | 009C | Universal rev | Universal Revision- Revision of the Universal Device Description, that the Field Device conforms to | R | Unsigned | 128 |
transmitter_revision | 009D | Fld dev rev | Field Device Revision- Revision of the Field Device Specific Device Description, that the Field Device conforms to | R | Unsigned | 128 |
software_revision | 009E | Software rev | Field Device Software Revision- This revision corresponds to the software or firmware, that is embedded in the Field Device | R | Unsigned | 2048 |
hardware_revision | 009F | Hardware rev | Revisión del hardware: Revisión que corresponde al hardware electrónico del dispositivo de campo. | R | Unsigned | 2048 |
device_id | 00A1 | Dev id | Field Device Identification- Uniquely identifies the Field Device when combined with the Manufacturer Identification and Device Type. Therefore, this variable cannot be modified by the Host user. | R | Unsigned | 2048 |
response_preambles | 0FE2 | Num resp preams | Number of Response Preambles- Number of Preambles to be sent in the response message from the Field Device to the Host | R | Unsigned | 128 |
max_num_device_variables | 00CE | Max dev vars | Maximum Number of Device Variables- This indicates the last Device Variable code that a host application should expect to be found in the field device (e.g., when identifying the Device Variables using Command 54) | R | Unsigned | 2048 |
config_change_counter | 00CF | Cfg chng count | Contador de cambios de configuración: Indica el número de veces que la configuración o la calibración del dispositivo se ha cambiado por la aplicación host o desde una interfaz de operador local. | R | Unsigned | 2050 |
tag | 00A3 | Etiqueta | Etiqueta: Texto asociado a la instalación del dispositivo de campo. El usuario puede usar este texto de cualquier manera. Un uso recomendado es como etiqueta única para una planta que se correlaciona con la etiqueta de dispositivo de campo: esquema de planta, o en un sistema de control. Esta variable también se usa como tipo de dirección de la capa de enlace de datos. | R/W | PackedAscii | 2048 |
longTag | 00D2 | Long tag | Etiqueta larga: Funciona exactamente igual que la etiqueta excepto que el tamaño es mayor (máximo 32 caracteres ISO Latín 1). | R/W | ASCII | 2048 |
device_variable_code_1 | 00E1 | R/W | Index | 4096 | ||
device_variable_code_2 | 00E2 | R/W | Index | 4096 | ||
device_variable_code_3 | 00E3 | R/W | Index | 4096 | ||
device_variable_code_4 | 00E4 | R/W | Index | 4096 | ||
device_variable_code_5 | 0100 | R/W | Index | 4096 | ||
device_variable_code_6 | 0101 | R/W | Index | 4096 | ||
device_variable_code_7 | 0102 | R/W | Index | 4096 | ||
device_variable_code_8 | 0103 | R/W | Index | 4096 | ||
time_stamp | 00FE | Time Stamp | Relative time value on network | R | Time | 2050 |
polling_address | 00A2 | Poll addr | Polling Address- Address used by the Host to identify a Field Device, and changeable by the User to control: the Multidrop Mode for Analog Output 1), and the Analog Output Fixed Mode of Analog Output 1) | R/W | Unsigned | 128 |
message | 00A4 | Mensaje | Mensaje: Texto asociado al dispositivo de campo. El usuario puede usar este texto de cualquier manera. No hay ningún uso recomendado. | R/W | PackedAscii | 2048 |
descriptor | 00A5 | Descriptor | Descriptor- Text that is associated with the Field Device. This text can be used by the user in any way. There is no specific recommended use. | R/W | PackedAscii | 2048 |
date | 00A6 | Fecha | Fecha: Fecha del calendario gregoriano almacenada en el dispositivo de campo. El usuario puede usar esta fecha de cualquier manera. No hay ningún uso específico recomendado. | R/W | HartDate | 2048 |
Name | ID | Label | Description | Type | Access | Class |