Loading…
Loading…
名称 | ID | 标签 | 描述 | 类型 | 访问 | 分类 |
---|---|---|---|---|---|---|
remote_seal_fill_fluid | 400D | RS填充液 | Remote Seal Fill Fluid- Fluid material in the device remote seal. | 读/写 | 枚举 | 2048 |
module_range_code | 4000 | 模块范围 | Module range- pressure range located on the side of the sensor | 读 | 枚举 | 2048 |
temperature_value | 4001 | Amp temp | Field Device Variable Value- Digital value that changes with respect to process or ambient temperature over time with no user intervention. Sensor Temperature- Temperature associated with the sensor that is responsible for a process measurement. | 读 | 浮点 | 10 |
temperature_units | 4018 | Amp temp unit | Field Device Variable Unit- Digital unit that the variable will be displayed with. Sensor Temperature- Temperature associated with the sensor that is responsible for a process measurement. | 读 | 枚举 | 8 |
upper_display_value | 401C | UDV | XMTR LCD- Transmitter LCD display parameter. XMTR LCD Display is able to set in independence with Analog Output. UDV: Upper Disp Value- Available range is as below; -99999 to 99999 -9999.9 to 9999.9 -999.99 to 999.99 -99.999 to 99.999 -9.9999 to 9.9999 | 读/写 | 浮点 | 256 |
lower_display_value | 401D | LDV | XMTR LCD- Transmitter LCD display parameter. XMTR LCD Display is able to set in independence with Analog Output. LDV: Lower Disp Value- Available range is as below; -99999 to 99999 -9999.9 to 9999.9 -999.99 to 999.99 -99.999 to 99.999 -9.9999 to 9.9999 | 读/写 | 浮点 | 256 |
digit_number_under_decimal_point | 401E | Digit_DP | XMTR LCD- Transmitter LCD display parameter. XMTR LCD Display is able to set in independence with Analog Output. Digit_DP: Digit under Decimal Point- Available range is from 0 to 4 as below; 0 (XXXXX) 1 (XXXX.X) 2 (XXX.XX) 3 (XX.XXX) 4 (X.XXXX) | 读/写 | 无符号 | 256 |
unit_code | 401F | LCD_Unit | XMTR LCD- Transmitter LCD display parameter. XMTR LCD Display is able to set in independence with Analog Output. There are 4 groups as below. All units appear in series. 1)Pressure(DISP=LIN)2)Level(DISP=LIN) 3)Flow(DISP=SQR) 4)Special(%and None) | 读/写 | 枚举 | 256 |
option | 4020 | LCD_Opt. | XMTR LCD- Transmitter LCD display parameter. XMTR LCD Display is able to set in independence with Analog Output. LCD_Opt.: AZ_LCD_Option is not used now. | 读/写 | 无符号 | 256 |
Cut_Point_value | 4005 | Cut_Pt % | Cut_Pt: Low Cut Point- Dimension in % Flow at Calibrated Range, affects Analog Output and Transmitter LCD in SQR mode only. Available range is from 0% to 20% Flow. | 读/写 | 浮点 | 16 |
Cut_Mode_value | 4006 | Cut_Mode | Cut_Mode: Low Cut Mode- Output mode below Low Cut Point, affects Analog Output and Transmitter LCD in SQR mode only. Available mode is LINEAR or ZERO. | 读/写 | 枚举 | 16 |
burnout_current_overscale | 4027 | Overscale | Overscale_Current is able to set in the range from 20.8mA to 21.6mA. | 读/写 | 枚举 | 16 |
burnout_current_underscale | 4028 | Underscale | Underscale_Current is able to set in the range from 3.2mA to 3.8mA. | 读/写 | 枚举 | 16 |
cell_body_no | 400C | Cell B/N | Cell B/N: Cell_Body_No- Manufacturer Cell Body Number consist of 8 digits(max.), read only. | 读 | 压缩文本 | 2048 |
model_code | 4014 | Model_Code | Model Code- Manufacturer Model Code consist of 16 digits(max.) not including hyphen. | 读/写 | 压缩文本 | 2048 |
serial_number | 4015 | Ser-No | Ser-No: Serial_Number- Manufacturer Serial Number consist of 8 digits(max.), read only. | 读 | 压缩文本 | 2048 |
unique_device_type_code | 07ED | 读/写 | 枚举 | 128 | ||
rosemount_model_code | 07F5 | 读/写 | 枚举 | 2048 | ||
rosemount_analytical_model_code | 07F6 | 读/写 | 枚举 | 2048 | ||
kayray_model_code | 07F7 | 读/写 | 枚举 | 2048 | ||
micro_motion_model_code | 07F8 | 读/写 | 枚举 | 2048 | ||
units_code | 07E9 | 读/写 | 枚举 | 4096 | ||
transfer_function_code | 07EA | 读/写 | 枚举 | 4096 | ||
material_code | 07EC | 读/写 | 枚举 | 4096 | ||
alarm_selection_code | 07EB | 读/写 | 枚举 | 4096 | ||
write_protect_code | 07EE | 读/写 | 枚举 | 2048 | ||
company_identification_code | 07EF | 读/写 | 枚举 | 128 | ||
burst_mode_control_code | 07F0 | 读/写 | 枚举 | 128 | ||
physical_signaling_codes | 07F1 | 读/写 | 枚举 | 2048 | ||
flag_assignment | 07F2 | 读/写 | 枚举 | 128 | ||
operating_mode_code | 07F3 | 读/写 | 枚举 | 2048 | ||
analog_output_numbers_code | 07F4 | 读/写 | 枚举 | 4096 | ||
response_code | 0096 | 特定命令响应代码——现场设备响应返回的数据,表示主机请求命令发送成功。该信息可能与主机请求数据或命令本身有关。 | 读/写 | 枚举 | 129 | |
comm_status | 0098 | 通讯错误汇总——现场设备在尝试接收主机请求时检测到下列错误条件。因此命令未被接受,并且主机请求在现场设备上未引起变化。 | 读/写 | 位枚举 | 131 | |
device_status | 0097 | 现场设备状态——表示现场设备已检测到有关硬件/变量有效性/操作状态/内部过程的条件的数据。 | 读/写 | 位枚举 | 131 | |
manufacturer_id | 0099 | 厂商 | 厂商ID代码——指特殊厂商,一般为制造该现场设备的公司名。 | 读 | 枚举 | 128 |
device_type | 009A | 型号 | 型号——指现场设备类型,一般是单一厂商唯一的广告型号。 | 读 | 枚举 | 128 |
request_preambles | 009B | 请求的前同步码数 | 请求前同步码数——现场设备要求的来自主机请求的前同步码数。 | 读 | 无符号 | 128 |
universal_revision | 009C | 通用版本 | 通用版本——现场设备对应的通用设备描述的版本。 | 读 | 无符号 | 128 |
transmitter_revision | 009D | 现场设备版本 | 现场设备版本——现场设备对应的特殊设备描述的版本。 | 读 | 无符号 | 128 |
software_revision | 009E | 软件版本 | 现场设备软件版本——该版本对应现场设备内置的软件或固件。 | 读 | 无符号 | 2048 |
hardware_revision | 009F | 硬件版本 | 硬件版本——现场设备的电子硬件对应的版本。 | 读 | 无符号 | 2048 |
physical_signaling_code | 00AB | 物理信号代码 | 物理信号代码——物理信号代码描述在负责HART通讯端口的硬件中执行的物理层的类型。 | 读 | 枚举 | 2048 |
device_flags | 00A0 | 设备标志 | 现场设备标志——描述影响数据链路层的现场设备的特性。 | 读 | 位枚举 | 128 |
device_id | 00A1 | 设备ID | 现场设备ID——与厂商ID和设备类型结合用于识别现场设备。因此,该变量不能由主机用户修改。 | 读 | 无符号 | 128 |
polling_address | 00A2 | 轮询地址 | 轮询地址——主机用以识别现场设备的地址,用户可以修改控制模拟量输出1的多支路模式和模拟量输出1的模拟量输出固定模式。 | 写 | 无符号 | 128 |
tag | 00A3 | 位号 | 位号——与现场设备安装关联的文本。用户可以任意方式使用该文本。推荐的用法是作为与现场设备标签关联的厂区的唯一标签:厂区图,或控制系统上的标签。该变量总是用作数据链路层地址句柄。 | 读/写 | 压缩文本 | 2048 |
message | 00A4 | 消息 | 消息——与现场设备关联的文本。用户可以任意方式使用该文本。没有特别推荐的用法。 | 读/写 | 压缩文本 | 2048 |
descriptor | 00A5 | 描述 | 描述符——与现场设备关联的文本。用户可以任意方式使用该文本。没有特别推荐的用法。 | 读/写 | 压缩文本 | 2048 |
date | 00A6 | 日期 | 日期——储存在现场设备中的公历日期。用户可以任意方式使用该日期。没有特别推荐的用法。 | 读/写 | HART日期 | 2048 |
名称 | ID | 标签 | 描述 | 类型 | 访问 | 分类 |