Loading…
Name ID Label Description Type Access Class
ACT_Manufact_Id 405F Manufacturer Displays actuator manufacturer. R/W Enum 2048
ACT_Size 4060 Model Displays Actuator model. R/W Enum 2048
ACT_Area 4061 Actuator area R/W Unsigned 2048
ACT_Type_LR 4071 Type Actuator type i.e. linear or rotary; piston or diaphragm etc. R/W Enum 2048
ACT_Spring_Type 4072 Spring Spring type i.e. single or heavy duty etc. R/W Enum 2048
analog_value 4073 Loop Crnt Current being sent to the positioner on the 4 to 20mA loop. R Float 66
AODetected 4074 AO Detected Indicates the positioner is analog output capable. R Enum 2048
AutoTune 4075 Auto Tune The positioner will calculate new tuning parameter values when stroke calibrated with Auto selected. Manual setting causes positioner to use current tuning values. R/W Enum 32
CAL_Cal_Mode 4031 Calbration Mode This variable shows the state of the positioner during calibration. Each value of Calibrate corresponds to a specific stage in the calibration process. The most common states: Calibrate=0, Normal operation, calibration OFF, position control enabled; Calibrate=1, Automatically calibrate stroke; Calibrate=2, Automatically calibrate actuator pressure sensors; Calibrate=3, acquire command counts with loop current at 0%; Calibrate=4, command counts with loop current at 100%; Calibrate=5, Moving valve to closed position, get Stem position at 0%; Calibrate=6, moving valve to open position, get stem position at 100%; Calibrate=7, Calibrating supply sensor; Calibrate=8, Calibrating Actuator Sensor, closing valve; Calibrate=9, Calibrating Actuator sensor, opening valve; Calibrate=11, quick-cal button has been pressed; Calibrate=12,Error occurred during Calibration. R/W Unsigned 34
CAL_Loop_Date 404F Analog Input Cal Date Date of calibration and initials of person who performed calibration. These should be entered at the time of calibration. R/W ASCII 2052
Name ID Label Description Type Access Class