Loading…
Loading…
Name | ID | Label | Description | Type | Access | Class |
---|---|---|---|---|---|---|
LSOperatingMode | 407F | R | Enum | 32 | ||
LSSimulationMode | 40BF | R | Enum | 32 | ||
LSTotalizer1Unit | 40C0 | R/W | Enum | 4096 | ||
MassFlowUnit | 40C1 | Mass flow unit | Selection of the volume flow unit | R/W | Enum | 32 |
MaxAlarmCurrent | 40C2 | High alarm curr. | Enter current value for maximum alarm current / Input range: 21...23mA | R/W | Float | 32 |
MaxOutCurrentEasy | 40C3 | Set URV | Enter a flow / pressure value for the upper current value (20mA) | R/W | Float | 32 |
MeasuredLevelAfterSimulation | 4031 | Level before Lin | Displays the level value prior to linearisation | R | Float | 2 |
MeasuredTankContentAfterSimulation | 4032 | Tank content | Displays the level value after linearisation | R | Float | 2 |
MeasuredTemperature1 | 402D | Sensor temp. | Displays the temperature currently measured in the sensor / The value can deviate from the process temperature | R | Float | 2 |
MeasuredTemperature3 | 4034 | Electronics temp | Displays the measured temperature of the main electronics | R | Float | 2 |
MeasuredValue | 40C5 | Measured value | R | Float | 2 | |
MeasuredValueUnit | 40C6 | R/W | Enum | 32 | ||
MinOutCurrentEasy | 40C7 | Set LRV | Enter a flow / pressure value for the lower current value (4mA) | R/W | Float | 32 |
MinSpan | 4027 | Minimum span | R | Float | 32 | |
NormFlowUnit | 40C8 | Norm flow unit | Selection of the volume flow unit | R/W | Enum | 32 |
NrOfPreambles | 40C9 | Preamble number | Enter the number of preambles in the HART protocol | R/W | Unsigned | 32 |
OperatingHoursValue | 40CA | Operating hours | Displays the hours of operation / Can't be reseted | R | Unsigned | 2 |
OperatingMode | 4036 | Measuring mode | The opertating menu is structured according to the selected measuring mode | R/W | Enum | 32 |
OutUnitEasy | 4099 | Output unit | Selection of the unit for display and parameter MEASURED VALUE | R/W | Enum | 32 |
PercentUnit | 40CC | R/W | Enum | 32 | ||
PollingAddress | 40CD | Bus address | Enter the address for the exchange of data via HART protocol | R/W | Unsigned | 32 |
Pressure1AbsoluteRange | 40CE | PRESSURE ABS RNG | R | Float | 32 | |
Pressure1AcceptInstallOffset | 40CF | Pos. input value | R/W | Float | 32 | |
Pressure1AcceptZeroInstallOffset | 40D0 | Pos. zero adjust | Gets the acting pressure as offset | R/W | Enum | 32 |
Pressure1AfterCalibration | 402B | Corrected press. | Displays the corrected pressure | R | Float | 2 |
Pressure1AfterDamping | 402A | Pressure af.damp | Displays the measured pressure after damping | R | Float | 2 |
Pressure1AfterSensor | 402C | Sensor pressure | Displays the measured pressure before sensor trim, position adjustment and damping | R | Float | 2 |
Pressure1Damping | 4028 | Damping value | R/W | Float | 32 | |
Pressure1FinalValue | 4024 | Meas. pressure | Displays the measured pressure after sensor recalibration, position adjustment and damping | R | Float | 2 |
Pressure1InputInversion | 40D3 | High press. side | R/W | Enum | 32 | |
Pressure1InstallOffset | 40D5 | Calib. offset | Position adjustment / Sets the zero point to zero | R/W | Float | 32 |
Pressure1InstallOffsetAbs | 40D6 | Calib. offset | Position adjustment / Sets the zero point to zero | R/W | Float | 32 |
Pressure1LowerCalMeasured | 40D7 | Lo trim measured | Displays the pressure present during the calibration of the device for the lower cal. point | R | Float | 32 |
Pressure1LowerCalWritten | 4026 | Lo trim sensor | Sets the acting pressure for the lower calibration point | R/W | Float | 32 |
Pressure1MaxResetable | 40D8 | Max. meas.press. | Displays the largest measured pressure value / For reset press RESET PEAKHOLD | R | Float | 2 |
Pressure1MinResetable | 40D9 | Min. meas.press. | Displays the smallest measured pressure value / For reset press RESET PEAKHOLD | R | Float | 2 |
Pressure1SensorHighLimit | 40DA | URL sensor | Displays the upper measuring limit of the sensor | R | Float | 32 |
Pressure1SensorLowLimit | 40DB | LRL sensor | Display s the lower measuring limit of the sensor | R | Float | 32 |
Pressure1SimulationValue | 40DC | Sim. pressure | Enter simulation value | R/W | Float | 32 |
Pressure1Unit | 40DD | Press. eng. unit | Selection of the pressure unit | R/W | Enum | 32 |
Pressure1UpperCalMeasured | 40DE | Hi trim measured | Displays the pressure present during the calibration of the device for the upper cal. point | R | Float | 32 |
Pressure1UpperCalWritten | 4025 | Hi trim sensor | Sets the acting pressure for the upper calibration point | R/W | Float | 32 |
PressureLowerRangeValue | 40DF | Set LRV | Sets lower range value without reference pressure | R/W | Float | 32 |
PressureUpperRangeValue | 40E0 | Set URV | Sets upper range value without reference pressure | R/W | Float | 32 |
PrimaryVariable | 40E1 | Primary value | Displays the primary value | R | Float | 2 |
PrimaryVariableCode | 40E2 | Primary value is | Displays the measured value depending on the measuring mode selected | R | Enum | 32 |
PrimaryVariableUnit | 40E3 | PV unit | R | Enum | 32 | |
QuaternaryVariable | 40E4 | 4th value | Displays the fourth process value | R | Float | 2 |
QuaternaryVariableCode | 40E5 | 4th value is | Selection of the fourth process value | R | Enum | 32 |
QuaternaryVariableUnit | 40E6 | QV unit | R | Enum | 32 | |
Name | ID | Label | Description | Type | Access | Class |