Loading…
Name ID Label Description Type Access Class
HO_Altitude_1 4043 Altitude R/W Float 128
HO_ConfigChangedCounter_1 4044 Configuration counter Use this function to display the counter reading for changes to device parameters. Info: Static parameters, whose values change during optimization or configuration, cause this parameter to increment by 1. This supports parameter version management. If several parameters change, e. g. due to loading of parameters from FieldCare, etc. in the device, the counter can show a higher value. The counter can never be reset and is not reset to a default value after a device reset. If the counter overflows, (16 bit), it starts again at 1. R Unsigned 2
HO_DateCode_1 4045 HART date code Enter date of the last configuration change. Use this format yyyy-mm-dd R/W ASCII 128
HO_Descriptor_1 4046 HART descriptor Use this function to define a description for the measuring point. Maximum length: 16 characters Allowed characters: A-Z, 0-9, certain special characters R/W ASCII 128
HO_DeviceID_1 4047 Device ID Shows the device ID for identifying the device in a HART network R Unsigned 128
HO_ExpandedDeviceType_1 4048 Device type Shows the device type with which the measuring device is registered with the HART Communication Foundation R Unsigned 128
HO_ExpandedVendorID_1 4049 Manufacturer ID Shows the manufacturer ID device is registered with the HART Communication Foundation R Unsigned 128
HO_FinalAssemblyNumber_1 404A Final assembly number R/W Unsigned 128
HO_Latitude_1 404B Latitude R/W Float 128
HO_LocationDescription_1 404C Location Description R/W ASCII 128
Name ID Label Description Type Access Class