Loading…
Name ID Label Description Type Access Class
Snsr2DisplayLS 4131 Conc LS Limit Status- Indicates whether the device variable is limited (i.e., not responding to a process). R Enum 10
Snsr2DisplayStatus 4132 Conc Fmly stat Device Family Status- Indicates additional status information on a device variable for a specific device family. R BitEnum 10
Snsr2DisplayUSL 4133 Conc USL Upper Sensor Limit Value- Defines the maximum usable value for the Upper Range Value. R Float 0
Snsr2DisplayLSL 4134 Conc LSL Lower Sensor Limit Value- Defines the minimum usable value for the Lower Range Value. R Float 0
Snsr2DisplayMinimumSpan 4135 Conc min span Minimum Span Value- Defines the smallest allowable difference between the Upper Range Value and the Lower Range Value. R Float 0
Snsr2DisplayDampingValue 4136 Conc damp Damping Value- Damping time constant applied to both the Digital Value representation and Analog Value of the respective Analog Output. The units of this variable are always in seconds. R Float 0
Snsr2DisplayUpdatePeriod 4137 Conc Update Period R Time 0
Snsr2DisplaySerialNumber 4138 Conc snsr s/n Sensor Serial Number- Uniquely identifies the sensor from which the Digital Value representation or Field Device variable is primarily derived. R/W Unsigned 2048
Snsr2DisplaySimulated 4139 Simulate W Enum 2052
Snsr2DisplayLowerTrimPoint 413A Conc Lower trim Lower Trim Point- Applied process input at which the last lower trim of the device variable was performed. R Float 0
Name ID Label Description Type Access Class