Loading…
Name ID Label Description Type Access Class
Snsr1CalibMinimumUTP 4112 Conc Min upper trim Minimum Upper Trim Point- The lowest applied process value that can be used duirng a high trim procedure (ie, no value lower than this will be accepted by the instrument). R Float 0
Snsr1CalibMaximumUTP 4113 Conc Max upper trim Maximum Upper Trim Point- The highest applied process value that can be used duirng a high trim procedure (ie, no value higher than this will be accepted by the instrument). R Float 0
Snsr1CalibMinimumTrimDiff 4114 Conc Min trim diff Minimum Trim Differential- The minimum acceptable difference between the upper and lower trim points. R Float 0
Snsr1TemperatureValue 4115 Snsr 2 Temp Sensor 2 Temperature R Float 10
Snsr1TemperatureUnits 4116 Snsr Temp unit Sensor Temperature Units- Engineering unit to be displayed with Sensor Temperature. R Enum 8
Snsr1TemperatureFamily 4117 Device Family- Indicates the family (i.e, pressure, temperature, flow, etc.) that the device variable belongs. R Enum 2048
Snsr1TemperatureClassification 4118 Temperature Class Classification- Indicates the unit code expansion table used for a particular dynamic or device variable. R Enum 0
Snsr1TemperaturePDQ 4119 Temperature PDQ Process Data Quality- Indicates the overall process data quality of the device variable value. R Enum 10
Snsr1TemperatureLS 411A Temperature LS Limit Status- Indicates whether the device variable is limited (i.e., not responding to a process). R Enum 10
Snsr1TemperatureStatus 411B Temperature Fmly stat Device Family Status- Indicates additional status information on a device variable for a specific device family. R BitEnum 10
Name ID Label Description Type Access Class