Loading…
Name ID Label Description Type Access Class
dec_sensor_value 4000 PV Field Device Variable Value- Digital value that changes magnitude with respect to time with no user intervention R Float 10
dec_sensor_units 4001 PV Snsr unit Field Device Variable Unit- Engineering unit to be displayed with the Digital Value representation, Minimum Span, Upper Range Value, Lower Range Value, Lower Sensor Limit, and Upper Sensor Limit R Enum 8
dec_sensor_upper_limit 4002 PV USL Upper Sensor Limit Value- Defines the maximum usable value for the Upper Range Value. R Float 8
dec_sensor_lower_limit 4003 PV LSL Lower Sensor Limit Value- Defines the minimum usable value for the Lower Range Value. R Float 8
dec_sensor_minimum_span 4004 PV Min span Minimum Span Value- Defines the smallest allowable difference between the Upper Range Value and the Lower Range Value. R Float 8
dec_sensor_damping_value 4005 PV Damp Damping Value- Damping time constant applied to both the Digital Value representation and Analog Value of the respective Analog Output. The units of this variable are always in seconds. R Float 8
dec_analog_value 4006 AO1 Analog Output Value- Value that tracks the Digital Value representation, under normal operating modes R/W Float 66
dec_analog_alarm_code 4007 AO Alrm typ Analog Output Alarm Type- Defines how the Analog Output will respond when the Field Device detects that the Analog Output may not be tracking the associated Field Device Variable. NOTE- The Digital Value representation may not be determinate. R Enum 64
dec_calibration_date 4008 CalDate The user is encouraged to keep track of the last calibration date here. This date is for information only and is not used in any internal calculations. R/W HartDate 12
dec_input_percent_range 4009 PV % rnge Percent of Range- Variable that tracks the Digital Value representation with respect to the range defined by the Lower Range Value and Upper Range Value, for normal operating modes. The units of this variable are always in percent. R Float 34
dec_input_transfer_function 400A Xfer fnctn Transfer Function- Defines the transformation function that will be applied from the Field Device Variable to the Analog Output, and Percent Range. The Transfer Function does not affect the Digital Value representation. R Enum 32
dec_input_upper_value 400B PV URV Upper Range Value- Defines the operational endpoint from which the Analog Value, and the 100% point of the Percent Range are derived. In addition, the Upper Range Value defines an operational endpoint which the alarms associated with the Analog Value, and the alarms associated with the Digital Value representation are derived. R Float 32
dec_input_lower_value 400C PV LRV Lower Range Value- Defines the operational endpoint from which the Analog Value, and the 0% point of the Percent Range are derived. In addition, the Lower Range Value defines an operational endpoint which the alarms associated with the Analog Value, and the alarms associated with the Digital Value representation are derived. R Float 32
dec_sensor_serial_number 400D PV Snsr s/n Sensor Serial Number- Uniquely identifies the sensor from which the Digital Value representation or Field Device variable is primarily derived. R Unsigned 2048
dec_log_request 400E Event log request W Enum 4096
dec_password 400F Set Password The password is used to validate the command to enable or disable writes in the device. W ASCII 2052
dec_write_enable 4010 Set Write Protect Used to set the write protect mode. With Write Protect (On), variables cannot be written to the device and commands that cause actions to be performed in the device cannot occur. W Enum 2052
x3302_bit_fire_status 401F Fire Indicates (Y) if the device is in a fire alarm status. - analog output is at 20mA, fire alarm relay is actuated and LED is red. R Enum 2051
x3302_bit_oi_cal_active 4020 Oi Calibrate Active Oi Calibration is active. R Enum 2051
x3302_bit_man_oi_active 4021 Manual Oi Active Manual Oi is active. R Enum 2051
x3302_bit_warm_up 4022 Warm Up Device is in the power-up time delay (warm-up) mode. Normal duration 30 seconds. R Enum 2051
x3302_bit_fault_status 4023 Fault Indicates (Y) if a fault condition exists.Go to (Device Info) and select (Status Info) to determine the nature of the fault. R Enum 2051
x3302_bit_auto_oi_fault 4024 Automatic Oi Fault Automatic Oi Fault. Check viewing windows and Oi reflector plate for cleanliness. R Enum 2051
x3302_bit_man_oi_fault 4025 Manual Oi Fault The detector has failed the last manual Oi test. R Enum 2051
x3302_bit_oi_cal_fault 4026 Oi Calibrate Fault An Oi calibration fault has occured. R Enum 2051
Name ID Label Description Type Access Class