Loading…
Loading…
Name | ID | Label | Description | Type | Access | Class |
---|---|---|---|---|---|---|
status_primo | 4012 | Add. Trans.Status | R | BitEnum | 2051 | |
sensor_value | 405F | abs. Flowrate | Field Device Variable Value- Digital value that changes magnitude with respect to time with no user intervention | R | Float | 10 |
sensor_units | 4005 | Flow unit | Field Device Variable Unit- Engineering unit to be displayed with the Digital Value representation, Minimum Span, Upper Range Value, Lower Range Value, Lower Sensor Limit, and Upper Sensor Limit | R/W | Enum | 8 |
sensor_upper_limit | 401E | PV USL | Valor límite superior del sensor: Define el valor máximo utilizable para el valor de rango superior. | R | Float | 8 |
sensor_lower_limit | 401F | PV LSL | Valor límite superior del sensor: Define el valor máximo utilizable para el valor de rango superior. | R | Float | 8 |
sensor_minimum_span | 4060 | PV Min span | Valor de span mínimo: Define la menor diferencia permitida entre el valor de rango superior y el valor de rango inferior. | R | Float | 8 |
sensor_damping_value | 400D | PV Damp | Valor de amortiguación: Constante de tiempo de amortiguación que se aplica a la representación del valor digital y al valor analógico de la respectiva salida analógica. Las unidades de esta variable siempre se indican en segundos. | R/W | Float | 8 |
analog_value | 4061 | Current output | Valor de salida analógica: Valor que sigue la representación del valor digital, bajo modos de funcionamiento normales | R/W | Float | 66 |
analog_alarm_code | 4031 | AO Alrm typ | Analog Output Alarm Type- Defines how the Analog Output will respond when the Field Device detects that the Analog Output may not be tracking the associated Field Device Variable. NOTE- The Digital Value representation may not be determinate. | R | Enum | 64 |
input_percent_range | 4062 | rel. Flowrate | Porcentaje de rango: Variable que rastrea la representación del valor digital con respecto al rango definido por el valor de rango inferior y el valor de rango superior, para modos de funcionamiento normales. Las unidades de esta variable siempre son en porcentaje. | R | Float | 34 |
input_transfer_function | 4063 | Xfer fnctn | Función de transferencia: Define la función de transformación que se aplicará desde la variable de dispositivo de campo a la salida analógica y el rango de porcentaje. La función de transferencia no afecta a la representación del valor digital. | R | Enum | 32 |
input_upper_value | 4007 | max. Flowrate | Valor de rango superior: Define el punto final de funcionamiento del cual se derivan el valor analógico y el punto 100% del rango de porcentaje. Además, el valor de rango superior define un punto final de funcionamiento del que se derivan las alarmas asociadas con el valor analógico y las alarmas asociadas con la representación del valor digital. | R/W | Float | 32 |
input_lower_value | 4064 | min. Flowrate | Valor de rango inferior: Define el punto final de funcionamiento del que se derivan el valor analógico, y el punto 0% del rango de porcentaje. Además, el valor de rango inferior define un punto final de funcionamiento del que se derivan las alarmas asociadas al valor analógico y las alarmas asociadas a la representación del valor digital. | R/W | Float | 32 |
sensor_serial_number | 4000 | PV Snsr s/n | Número de serie del sensor: Identifica de manera única el sensor del que se deriva principalmente la representación del valor digital o la variable del dispositivo de campo. | R/W | Unsigned | 2048 |
low_flow_cut_off | 4001 | Low Flow Cutoff | The low flow is suppressing the indication resp. totalisation of 'wrong' liquid movements. The setting is posssible in the range of 0 - 10% referring to the full scale. | R/W | Float | 2048 |
flow_direction | 4002 | Flow Direction | At measurement in uni-directional direction flows will be indicated and added only in main flow direction. In bi-directional direction flow in both directions will be indicated and added. | R/W | Enum | 2048 |
detector_factor1 | 4003 | Detector Factor | Calibration constant detected and adjusted at the factory. Changing this value influences the measuring accuracy of the meter! This value should correspond to the transmitter constant on the sensor nameplate. | R/W | Float | 2048 |
pulse_value | 400B | Pulse output | The pulse value defines how many pulses per volume unit will be given. Max. output frequency 10 kHz. | R/W | Float | 2048 |
pulse_widthUnit | 4038 | Pulse width Unit | The time unit of the pulse length is ms (1/1000 second) | R/W | Enum | 2048 |
pulse_widthValue | 4039 | Pulse width | The pulse width defines the temporal length of a pulse. Max. 500 ms. | R/W | Float | 2048 |
frequencyUnit | 4036 | Frequency Unit | The unit of the frequency is in Hz. (Pulse/1 second) | R/W | Enum | 2048 |
frequencyValue | 4034 | Frequency | The frequency for the scaled terminal value can be adjusted from 500 to 5000 Hz. | R/W | Float | 2048 |
flow_signal1_low | 4008 | Flow Signal Low | The set point is for monitoring the momentary flow and is adjusted in percent (0-100%) of the full scale. The underflowing of this set point is signalled via relay 2. | R/W | Unsigned | 2048 |
flow_signal1_high | 4009 | Flow Signal High | The set point is for monitoring the momentary flow and is adjusted in percent (0-100%) of the full scale. The exceeding of this set point is signalled via relay 2. | R/W | Unsigned | 2048 |
preset_value | 400A | Preset | Realisation of simple batches. The value for the preset quantity can be adjusted from 0,01 to 999,99 volume units. The preset quantity is counted down from this value to 0 and the reaching of the preset quantity is signalled via relay 2. The preset meter can be resetted via an external probe or in the program menu. | R/W | Unsigned | 2048 |
Name | ID | Label | Description | Type | Access | Class |