Loading…
Loading…
Name | ID | Label | Description | Type | Access | Class |
---|---|---|---|---|---|---|
NumAnaIn | 401C | NumOAI | Number of Analog Inputs supported by the instrument | R | Integer | 2048 |
NumDigIn | 401D | NumODI | Number of Digital Inputs supported by the instrument | R | Integer | 2048 |
NumDigOut | 401E | NumODO | Number of Digital Outputs supported by the instrument | R | Integer | 2048 |
NumSamples | 401F | NumOSamples | Number of Samples supported by the instrument | R | Integer | 2048 |
ucNumDeviceStatus | 4020 | NumOStatus | Number of Status texts supported by the instrument | R | Integer | 2048 |
ucNumDecimals | 4021 | NumODec | Number of Decimals in the Constant | R | ASCII | 2048 |
channel | 4022 | Channel | Selected channel, for which all displayed results and configuration changes are valid | R/W | Integer | 2048 |
calib_set | 4024 | Calibration Set | The selected Calibration Set, for which all configuration changes will apply to (not the same as the active Calibration Set) | R/W | Integer | 2048 |
damping | 4025 | Damping | Damping time, a time constant that can be set to stabilize the signal | R/W | Float | 2048 |
offset | 4026 | Offset | Offset adjustment of known error in the calibration | R/W | Float | 2048 |
var_upr | 4027 | URV | Upper measuring range value, represented by an output signal of 20 mA. | R/W | Float | 2048 |
var_lwr | 4028 | LRV | Lower measuring range value, represented by an output signal of 4 mA. | R/W | Float | 2048 |
var_unit_code | 4029 | Unit | Unit of variable | R/W | Enum | 2048 |
var_alarm_selection | 402A | HART Alarm mode | Defines the behaviour of the analog output when the transmitter has entered an unrecoverable error state. The following alarm modes are available: Hi: Sets and locks the analog output signal to approximately 22.5 mA, Lo: Sets and locks the analog output signal to approximately 3.3 mA, Hold last out valu: Locks the analog output signal to its present level, None: No action | R/W | Enum | 2048 |
active_calib_set | 4034 | Active CalibSet | Active Calibration Set | R | Integer | 2050 |
dynamic_var_val | 4033 | Value | The dynamic measuring value for the selected channel | R | Float | 34 |
damping_value_factor | 400F | Damping value | Value of the damping value | R | Float | 34 |
percentofrange | 4035 | % of range | The dynamic measuring value in relation to the Upper Measuring Range (URV) value | R | Float | 34 |
var_current | 4036 | Analog out | The dynamic analog output value from the transmitter for the selected channel | R | Float | 34 |
rt_date | 4037 | RT date | Transmitter system date in the format MM/DD/YYYY | R/W | HartDate | 2048 |
rt_hour | 4038 | RT Hour | Hour setting of the transmitter system clock | R/W | Integer | 2048 |
rt_minute | 4039 | RT Minute | Minute setting of the transmitter system clock | R/W | Integer | 2048 |
rt_second | 403A | RT Sec | Second setting of the transmitter system clock | R/W | Integer | 2048 |
parameterindex | 403B | ParamIndex | The index number of the selected parameter | R/W | Integer | 2048 |
parameter_help_row | 403F | Param Help row | The index to the parameter | R/W | Integer | 2048 |
Name | ID | Label | Description | Type | Access | Class |