Loading…
Name ID Label Description Type Access Class
Actual_Position_Value 4000 Position Instrument Primary Variable expressed in Engineering Units. R Float 10
Actual_Position_Units 4001 Position Units Field Device Variable Unit- Engineering unit to be displayed with the Digital Value representation, Minimum Span, Upper Range Value, Lower Range Value, Lower Sensor Limit, and Upper Sensor Limit R Enum 8
Actual_Position_Family 4002 Device family Device Family- Indicates the family (i.e, pressure, temperature, flow, etc.) that the device variable belongs. R Enum 2048
Actual_Position_Classification 4003 Class Classification- Indicates the unit code expansion table used for a particular dynamic or device variable. R/W Enum 0
Actual_Position_PDQ 4004 PDQ Process Data Quality- Indicates the overall process data quality of the device variable value. R Enum 10
Actual_Position_LS 4005 LS Limit Status- Indicates whether the device variable is limited (i.e., not responding to a process). R Enum 10
Actual_Position_Status 4006 Family status Device Family Status- Indicates additional status information on a device variable for a specific device family. R BitEnum 10
Actual_Position_USL 4007 USL Upper Sensor Limit Value- Defines the maximum usable value for the Upper Range Value. R/W Float 0
Actual_Position_LSL 4008 LSL Lower Sensor Limit Value- Defines the minimum usable value for the Lower Range Value. R/W Float 0
Actual_Position_MinimumSpan 4009 Minimum Span Minimum Span Value- Defines the smallest allowable difference between the Upper Range Value and the Lower Range Value. R/W Float 0
Actual_Position_DampingValue 400A Temp damp Damping Value- Damping time constant applied to both the Digital Value representation and Analog Value of the respective Analog Output. The units of this variable are always in seconds. R/W Float 0
Actual_Position_SerialNumber 400B Sensor s/n Sensor Serial Number- Uniquely identifies the sensor from which the Digital Value representation or Field Device variable is primarily derived. R/W Unsigned 2048
Actual_Position_Simulated 400C Simulate W Enum 2052
Actual_Position_UpdatePeriod 400D Temp Update Period R Time 0
Desired_Position_Value 400F Setpoint Instrument Primary Variable expressed in Engineering Units. Valid only if sensor. Calibration has been completed and accurate displacer and process fluid data have been entered in instrument memory R Float 10
Desired_Position_Units 4010 Setpoint Units Field Device Variable Unit- Engineering unit to be displayed with the Digital Value representation, Minimum Span, Upper Range Value, Lower Range Value, Lower Sensor Limit, and Upper Sensor Limit R Enum 8
Desired_Position_Family 4011 Device family Device Family- Indicates the family (i.e, pressure, temperature, flow, etc.) that the device variable belongs. R Enum 2048
Desired_Position_Classification 4012 Class Classification- Indicates the unit code expansion table used for a particular dynamic or device variable. R/W Enum 0
Desired_Position_PDQ 4013 PDQ Process Data Quality- Indicates the overall process data quality of the device variable value. R Enum 10
Desired_Position_LS 4014 LS Limit Status- Indicates whether the device variable is limited (i.e., not responding to a process). R Enum 10
Desired_Position_Status 4015 Family status Device Family Status- Indicates additional status information on a device variable for a specific device family. R BitEnum 10
Desired_Position_USL 4016 USL Upper Sensor Limit Value- Defines the maximum usable value for the Upper Range Value. R/W Float 0
Desired_Position_LSL 4017 LSL Lower Sensor Limit Value- Defines the minimum usable value for the Lower Range Value. R/W Float 0
Desired_Position_MinimumSpan 4018 Minimum Span Minimum Span Value- Defines the smallest allowable difference between the Upper Range Value and the Lower Range Value. R/W Float 0
Desired_Position_DampingValue 4019 Temp damp Damping Value- Damping time constant applied to both the Digital Value representation and Analog Value of the respective Analog Output. The units of this variable are always in seconds. R/W Float 0
Desired_Position_SerialNumber 401A Sensor s/n Sensor Serial Number- Uniquely identifies the sensor from which the Digital Value representation or Field Device variable is primarily derived. R/W Unsigned 2048
Desired_Position_Simulated 401B Simulate W Enum 2052
Desired_Position_UpdatePeriod 401C Temp Update Period R Time 0
Torque_Value 401E Torque Instrument Primary Variable expressed in Engineering Units. R Float 10
Torque_Units 401F Torque Units Field Device Variable Unit- Engineering unit to be displayed with the Digital Value representation, Minimum Span, Upper Range Value, Lower Range Value, Lower Sensor Limit, and Upper Sensor Limit R Enum 8
Torque_Family 4020 Device family Device Family- Indicates the family (i.e, pressure, temperature, flow, etc.) that the device variable belongs. R Enum 2048
Torque_Classification 4021 Class Classification- Indicates the unit code expansion table used for a particular dynamic or device variable. R/W Enum 0
Torque_PDQ 4022 PDQ Process Data Quality- Indicates the overall process data quality of the device variable value. R Enum 10
Torque_LS 4023 LS Limit Status- Indicates whether the device variable is limited (i.e., not responding to a process). R Enum 10
Torque_Status 4024 Family status Device Family Status- Indicates additional status information on a device variable for a specific device family. R BitEnum 10
Torque_USL 4025 USL Upper Sensor Limit Value- Defines the maximum usable value for the Upper Range Value. R/W Float 0
Torque_LSL 4026 LSL Lower Sensor Limit Value- Defines the minimum usable value for the Lower Range Value. R/W Float 0
Torque_MinimumSpan 4027 Minimum Span Minimum Span Value- Defines the smallest allowable difference between the Upper Range Value and the Lower Range Value. R/W Float 0
Torque_DampingValue 4028 Temp damp Damping Value- Damping time constant applied to both the Digital Value representation and Analog Value of the respective Analog Output. The units of this variable are always in seconds. R/W Float 0
Torque_SerialNumber 4029 Sensor s/n Sensor Serial Number- Uniquely identifies the sensor from which the Digital Value representation or Field Device variable is primarily derived. R/W Unsigned 2048
Torque_Simulated 402A Simulate W Enum 2052
Torque_UpdatePeriod 402B Temp Update Period R Time 0
Raw_Position_Value 402D Raw Position Instrument Primary Variable expressed in Engineering Units. R Float 10
Raw_Position_Units 402E Raw Position Units Field Device Variable Unit- Engineering unit to be displayed with the Digital Value representation, Minimum Span, Upper Range Value, Lower Range Value, Lower Sensor Limit, and Upper Sensor Limit R Enum 8
Raw_Position_Family 402F Device family Device Family- Indicates the family (i.e, pressure, temperature, flow, etc.) that the device variable belongs. R Enum 2048
Raw_Position_Classification 4030 Class Classification- Indicates the unit code expansion table used for a particular dynamic or device variable. R/W Enum 0
Raw_Position_PDQ 4031 PDQ Process Data Quality- Indicates the overall process data quality of the device variable value. R Enum 10
Raw_Position_LS 4032 LS Limit Status- Indicates whether the device variable is limited (i.e., not responding to a process). R Enum 10
Raw_Position_Status 4033 Family status Device Family Status- Indicates additional status information on a device variable for a specific device family. R BitEnum 10
Raw_Position_USL 4034 USL Upper Sensor Limit Value- Defines the maximum usable value for the Upper Range Value. R/W Float 0
Name ID Label Description Type Access Class