Loading…
Name ID Label Description Type Access Class
DEC_off_time 4019 DEC off time Decrease (Close) solenoid off time. Solenoid pulsing mode can be engaged by setting both the #HART remote enable# bit and the #Solenoid speed# bit ON (Setup - Soft switch). If the #HART remote enable# bit is OFF then solenoid pulsing can be engaged by setting DIP 4 ON (up) on the positioner. R/W Integer 2048
INC_on_time 401A INC on time Increase (Open) solenoid on time. Solenoid pulsing mode can be engaged by setting both the #HART remote enable# bit and the #Solenoid speed# bit ON (Setup - Soft switch). If the #HART remote enable# bit is OFF then solenoid pulsing can be engaged by setting DIP 4 ON (up) on the positioner. R/W Integer 2048
DEC_on_time 401B DEC on time Decrease (Close) solenoid on time. Solenoid pulsing mode can be engaged by setting both the #HART remote enable# bit and the #Solenoid speed# bit ON (Setup - Soft switch). If the #HART remote enable# bit is OFF then solenoid pulsing can be engaged by setting DIP 4 ON (up) on the positioner. R/W Integer 2048
Dead_zone 401C Dead zone The actuator will start to position if the command signal changes from its last rest position by more than this percentage value. It will vary with actuator speed and should be set to give stable but responsive positioning. The dead zone can be modified here by setting both the #HART remote enable# bit and the #Solenoid speed# bit ON (Setup - Soft switch). If the #HART remote enable# bit is OFF then the dead zone is set by the DZ adjuster on the positioner. R/W Integer 2048
enable 401D Soft switch A series of 8 flags that can be set to modify the operation of the positioner R/W BitEnum 2048
Command_signal 401E Remote command Manual entry of a command signal sent by HART in the range 0 to 100, scaled over the calibrated range of the actuator. Both the #HART remote enable# bit and the #Remote command# bit must be set ON(Setup - Soft switch) for the actuator to respond. W Float 2048
Standard_model_code 0884 R/W Enum 4096
Ametek_model_code 086D R/W Enum 4096
Brooks_Instrument_model_code 086E R/W Enum 4096
Daniel_Industries_model_code 08B0 R/W Enum 4096
Name ID Label Description Type Access Class