Loading…
Name ID Label Description Type Access Class
sensor_serial_No 400F SensorSerNo Three byte number R Unsigned 2048
pvvar_limit_status 4010 PV Limit Status Field Device Variable Unit- Engineering unit to be displayed with the Digital Value representation, Minimum Span, Upper Range Value, Lower Range Value, Lower Sensor Limit, and Upper Sensor Limit R Enum 8
svvar_limit_status 4011 SV Limit Status Field Device Variable Unit- Engineering unit to be displayed with the Digital Value representation, Minimum Span, Upper Range Value, Lower Range Value, Lower Sensor Limit, and Upper Sensor Limit R Enum 8
pvvar_family_status 4012 Device Family Status Field Device Variable Unit- Engineering unit to be displayed with the Digital Value representation, Minimum Span, Upper Range Value, Lower Range Value, Lower Sensor Limit, and Upper Sensor Limit R BitEnum 8
svvar_family_status 4013 Device Family Status Field Device Variable Unit- Engineering unit to be displayed with the Digital Value representation, Minimum Span, Upper Range Value, Lower Range Value, Lower Sensor Limit, and Upper Sensor Limit R BitEnum 8
pv_var_class 4014 PV Var Class R Enum 8
sv_var_class 4015 SV Var Class R Enum 8
pv_Family 4016 PV fmly Device Family- Indicates the family (i.e, pressure, temperature, flow, etc.) that the device variable belongs. R Enum 2048
sv_var_famcode 4017 SV fmly Device Family- Indicates the family (i.e, pressure, temperature, flow, etc.) that the device variable belongs. R Enum 2048
INC_off_time 4018 INC off time Increase (Open) solenoid off time. Solenoid pulsing mode can be engaged by setting both the #HART remote enable# bit and the #Solenoid speed# bit ON (Setup - Soft switch). If the #HART remote enable# bit is OFF then solenoid pulsing can be engaged by setting DIP 4 ON (up) on the positioner. R/W Integer 2048
Name ID Label Description Type Access Class