Loading…
Loading…
名称 | ID | 标签 | 描述 | 类型 | 访问 | 分类 |
---|---|---|---|---|---|---|
position_value | 4000 | Position | Refers to the actual valve position in terms of percent. | 读 | 浮点 | 10 |
open_time_data_value | 4001 | Open Time | Refers to the open speed of the valve terms of time. | 读 | 无符号 | 10 |
close_time_data_value | 4002 | Close Time | Refers to the output close_time_data of OUT 1 of the IMVS in terms of percent. | 读 | 无符号 | 10 |
open_time_data_units | 4003 | Op_time Units | 现场设备变量单位——使用数值表示、最小范围、范围上限、范围下限、传感器上限和传感器下限显示的工程单位。 | 读/写 | 枚举 | 8 |
position_units | 4004 | Position Units | 现场设备变量单位——使用数值表示、最小范围、范围上限、范围下限、传感器上限和传感器下限显示的工程单位。 | 读 | 枚举 | 8 |
close_time_data_units | 4005 | cl_time Units | 现场设备变量单位——使用数值表示、最小范围、范围上限、范围下限、传感器上限和传感器下限显示的工程单位。 | 读 | 枚举 | 8 |
sensor_units | 4006 | Sensor Units | 现场设备变量单位——使用数值表示、最小范围、范围上限、范围下限、传感器上限和传感器下限显示的工程单位。 | 读 | 枚举 | 8 |
range_units | 4007 | 主变量范围单位 | 现场设备变量单位——使用数值表示、最小范围、范围上限、范围下限、传感器上限和传感器下限显示的工程单位。 | 读 | 枚举 | 8 |
analog_alarm_code | 4008 | 模拟量输出报警类型 | 模拟量输出报警类型——定义当现场设备检测到模拟量输出可能未跟踪关联现场设备变量时模拟量输出响应的方式。注意——数值表示可能不确定。 | 读 | 枚举 | 64 |
input_analog_value | 4009 | Input I | Refers to the requested position in terms of current in mA. | 读 | 浮点 | 66 |
output_analog_value | 400A | Transmit mA | Refers to the actual valve position in terms of current in mA. | 读 | 浮点 | 66 |
damping_val | 400B | 主变量阻尼 | 阻尼值——同时应用至各自模拟量输出的数值表示和模拟值的阻尼时间常数。该变量的单位始终为秒钟。 | 读 | 浮点 | 8 |
input_upper_value | 400C | FS In | Refers to the input current to move the valve to full open./ close position in normal / reverse operation. | 读 | 浮点 | 32 |
input_lower_value | 400D | Zero In | Refers to the input current to move the valve to full open./ close position in normal / reverse operation. | 读 | 浮点 | 32 |
output_upper_value | 400E | FS Out | Refers to the output current when the valve is at full open./ close position in normal / reverse operation. | 读 | 浮点 | 32 |
output_lower_value | 400F | Zero Out | Refers to the output current when the valve is at full open./ close position in normal / reverse operation. | 读 | 浮点 | 32 |
sensor_serial_number | 4010 | Sensor Serial | 传感器序列号——识别数值表示或现场设备变量来源的传感器。 | 读 | 无符号 | 32 |
min_sensor_span | 4011 | Min_Sensor_Span | 最小范围值——定义上限值和下限值之间允许的最小差。 | 读 | 浮点 | 32 |
flow_type | 4016 | Flow Type | The IMVS supports Linear, Quick Opening, and Equal Percentage flow types. | 读/写 | 枚举 | 32 |
Active_Processes | 4017 | Processes | Refers to the actual valve position in terms of percent. | 读 | 无符号 | 3 |
CmdFlags | 4018 | Command flags | Bit fields of mutually exclusive command bits. | 读/写 | 无符号 | 3 |
Pst_process_Flags | 4019 | PST_Err | 读/写 | 枚举 | 1025 | |
Pst_res_1 | 401A | 读/写 | 整型 | 1025 | ||
Pst_aborted | 401B | Pst_Abort | Pst_Abort | 读/写 | 枚举 | 1025 |
Pst_never_activated | 401C | Never_activated | Never_activated | 读/写 | 枚举 | 1025 |
名称 | ID | 标签 | 描述 | 类型 | 访问 | 分类 |