Loading…
Loading…
名称 | ID | 标签 | 描述 | 类型 | 访问 | 分类 |
---|---|---|---|---|---|---|
user_unit_mode | 4086 | User unit is | User unit mode -The state of the func- tion that generates a user configured engineering unit process variable from the percentage value obtained when the transfer func- tion is applied to the measured pres- sure. | 读/写 | 枚举 | 16 |
user_value_lower | 4087 | 0% | user value lower -Lower range of the process variable. The value which is desired for PV when the applied pres- sure is 0% of the pressure range | 读/写 | 浮点 | 16 |
user_value_upper | 4088 | 100% | user value upper -Upper range of the process variable. The value which is desired for PV when the applied pressure is 100% of the pres- sure range | 读/写 | 浮点 | 16 |
totalizer_mode | 408C | Total is | Totalizer mode -The state of the func- tion that generates a total integrated from the value ob- tained when the transfer function is applied to the meas- ured pressure. | 读/写 | 枚举 | 16 |
total_units_code | 4018 | Total Unit | 读/写 | 枚举 | 16 | |
total | 4012 | Total | Total -The value in- tegrated from the value obtained when the transfer func- tion is applied to the measured pres- sure. | 读 | 浮点 | 18 |
max_flow | 4090 | Max flow = | Max flow -The flow value corresponding to 100% measured pressure. Used to obtain the total. In units of volume or mass per second. | 读/写 | 浮点 | 16 |
total_conversion_factor | 4091 | U_Total = | Total conversion factor -a devision factor for the to- talized value Used to obtain the total, for a desierd period without over-run | 读/写 | 浮点 | 16 |
total_unit_string | 4095 | Unit String | Total unit -The en- gineering unit asso- ciate with the total obtained by the to- talizer | 读/写 | ASCII | 16 |
operation_code_1 | 4099 | 写 | 整型 | 2048 | ||
operation_code_2 | 409A | 写 | 整型 | 2048 | ||
request_temperature_value | 409C | Temp | Sensor temperature- temperature of the pressure sensor. | 读/写 | 浮点 | 10 |
response_code | 0096 | 特定命令响应代码——现场设备响应返回的数据,表示主机请求命令发送成功。该信息可能与主机请求数据或命令本身有关。 | 读/写 | 枚举 | 129 | |
comm_status | 0098 | 通讯错误汇总——现场设备在尝试接收主机请求时检测到下列错误条件。因此命令未被接受,并且主机请求在现场设备上未引起变化。 | 读/写 | 位枚举 | 131 | |
device_status | 0097 | 现场设备状态——表示现场设备已检测到有关硬件/变量有效性/操作状态/内部过程的条件的数据。 | 读/写 | 位枚举 | 131 | |
manufacturer_id | 0099 | 厂商 | 厂商ID代码——指特殊厂商,一般为制造该现场设备的公司名。 | 读 | 枚举 | 128 |
device_type | 009A | 型号 | 型号——指现场设备类型,一般是单一厂商唯一的广告型号。 | 读 | 枚举 | 128 |
request_preambles | 009B | 请求的前同步码数 | 请求前同步码数——现场设备要求的来自主机请求的前同步码数。 | 读 | 无符号 | 128 |
universal_revision | 009C | 通用版本 | 通用版本——现场设备对应的通用设备描述的版本。 | 读 | 无符号 | 128 |
transmitter_revision | 009D | 现场设备版本 | 现场设备版本——现场设备对应的特殊设备描述的版本。 | 读 | 无符号 | 128 |
software_revision | 009E | 软件版本 | 现场设备软件版本——该版本对应现场设备内置的软件或固件。 | 读 | 无符号 | 2048 |
hardware_revision | 009F | 硬件版本 | 硬件版本——现场设备的电子硬件对应的版本。 | 读 | 无符号 | 2048 |
physical_signaling_code | 00AB | 物理信号代码 | 物理信号代码——物理信号代码描述在负责HART通讯端口的硬件中执行的物理层的类型。 | 读 | 枚举 | 2048 |
device_flags | 00A0 | 设备标志 | 现场设备标志——描述影响数据链路层的现场设备的特性。 | 读 | 位枚举 | 128 |
device_id | 00A1 | DEV_ID | The number that is written on the iden- tification plate of the transmitter. This number must be altered every time that the main board is changed, in order to avoid digital communication pro- blems | 读/写 | 无符号 | 128 |
名称 | ID | 标签 | 描述 | 类型 | 访问 | 分类 |