Loading…
Name ID Label Description Type Access Class
averagePDQ 402D Temp PDQ Process Data Quality- Indicates the overall process data quality of the device variable value. R Enum 2
averageLS 402E Temp LS Limit Status- Indicates whether the device variable is limited (i.e., not responding to a process). R Enum 2
averageStatus 402F Temp Fmly stat Device Family Status- Indicates additional status information on a device variable for a specific device family. R BitEnum 2
averageUSL 4030 Temp USL Upper Sensor Limit Value- Defines the maximum usable value for the Upper Range Value. Pressure- Pressure of the process measured with respect to a reference pressure. R Float 0
averageLSL 4031 Temp LSL Lower Sensor Limit Value- Defines the minimum usable value for the Lower Range Value. Pressure- Pressure of the process measured with respect to a reference pressure. R Float 0
averageMinimumSpan 4032 Minimum Span Minimum Span Value- Defines the smallest allowable difference between the Upper Range Value and the Lower Range Value. Pressure- Pressure of the process measured with respect to a reference pressure. R Float 0
averageDampingValue 4033 Damp Damping Value- Damping time constant applied to both the Digital Value representation and Analog Value of the respective Analog Output. The units of this variable are always in seconds. R/W Float 0
averageSerialNumber 4034 Snsr s/n Sensor Serial Number- Uniquely identifies the sensor from which the Digital Value representation or Field Device variable is primarily derived. R Unsigned 0
differenceValue 4036 Difference Value R Float 2
differenceUnits 4037 Difference Unit R/W Enum 0
Name ID Label Description Type Access Class