Loading…
Name ID Label Description Type Access Class
ds_ao_high_limit 4038 Output high limit Output high limit- Analog output current signal high limit. R Float 2048
ds_do_status 4039 STATUS output STATUS output- Shows the STATUS output, Open or Close. R Enum 2050
ds_do_status_type 403A STATUS type STATUS type- Configures the STATUS output to OPEN or CLOSE at alarm condition. Normally Open (NO): When no alarm is detected, STATUS output is OPEN. When alarm is detected, STATUS output is CLOSE. Normally Close (NC): When no alarm is detected, STATUS output is CLOSE. When alarm is detected, STATUS output is OPEN. R/W Enum 2048
ds_do_status_select 403B STATUS selection STATUS selection- Select the STATUS output item from below. - None - Process alarm - Sensor temp. alarm - Calibration in process or Calibration failure - Process + Sensor temp. - Sensor temp. + Calibration - Calibration + Process - All R/W Enum 2048
ds_do_status_sim 403C Set STATUS simulation R/W Enum 2048
ds_do_status_sim_clear 403D Clear STATUS simulation R/W Enum 2048
ds_do_status_sim_cont 403E Continue STATUS simulation R/W Enum 2048
ds_do_calib 403F CALIB output CALIB output- Shows the CALIB output, Open or Close. R Enum 2050
ds_do_calib_type 4040 CALIB type CALIB type- The CALIB output is fixed at Normally Open (NO). Normally Open (NO): In normal operation, process gas will flow from Open port to GasCVD. And at the beginning of calibration, calibration gas will flow from Close port to GasCVD. R Enum 2048
ds_do_calib_sim 4041 Set CALIB simulation R/W Enum 2048
Name ID Label Description Type Access Class