Loading…
Name ID Label Description Type Access Class
co_type 4016 Contact Output Mode Contact Output Mode- Sets the contact output mode to either Normally Open or Normally Closed. --Normally Open: Contacts are normally open, but close when an alarm is detected. --Normally Closed: Contacts are normally closed, but open when an alarm is detected. R/W Enum 2048
alarm_select 4017 Contact Output ON/OFF Contact Output ON/OFF- Selects the alarms to reflect the contact output. R/W BitEnum 2048
alarm_select_output_low 40DD Output Low Output Low- This parameter determines whether or not detection of the output low-limit alarm is connected to the contact output circuit. R/W Enum 2048
alarm_select_output_high 40DE Output High Output High- This parameter determines whether or not detection of the output high-limit alarm is connected to the contact output circuit. R/W Enum 2048
alarm_select_temp_low 40DF Sensor Temp. Low Sensor Temp. Low- This parameter determines whether or not detection of the sensor's low-limit temperature alarm is connected to the contact output circuit. R/W Enum 2048
alarm_select_temp_high 40E0 Sensor Temp. High Sensor Temp. High- This parameter determines whether or not detection of the sensor's high-limit temperature alarm is connected to the contact output circuit. R/W Enum 2048
alarm_select_dummy 40E1 alarm_select_dummy R Unsigned 4096
disp_mode 4018 Display Mode Display Mode- Sets the device indicator's method of display. --%: Displays the currently measured pressure as a percentage of the preset measurement range. --Pressure: Displays the currently measured pressure in the selected pressure unit. --Scale: Displays the measured value (flow rate, level etc.) in user-selected or user-defined units. R/W Enum 256
disp_sqrt 4019 Display Function Display Function- Sets the type of analog output from the device. --Linear: Displays PV by linear scale. --Square root: Displays flow by square root extraction. R/W Enum 256
disp_unit 401A Disp. Unit Disp. Unit- Selects the engineering unit displayed on the indicator of the device. Valid when Scale is selected for Display Mode. R/W Enum 256
Name ID Label Description Type Access Class