Loading…
Name ID Label Description Type Access Class
si_unit 400C SI Unit R/W Enum 2048
alarm_state 400D Alarm Status Alarm Status- Displays the current alarm output status. R BitEnum 35
co_state 400E Contact Output Status Contact Output Status- Displays the contact output status. --Open: The contact output circuit open. --Closed: The contact output circuit close. --Sim Open: The contact output circuit open in simulation mode. --Sim Closed: The contact output circuit close in simulation mode. R/W Enum 34
alarm_pv_conf 4010 Output Alarm Output Alarm- Configures the output alarm. --No Alarm: Do not use the output alarm. --Lower Limit: If the output is below the lower limit for the ouput alarm, the alarm is activated. --Upper Limit: If the output is above the upper limit for the output alarm, the alarm is activated. --Lower/Uppe Limit: If the ouput is either below the lower limit or above the upper limit for the output alarm, the alarm is activated. R/W Enum 2048
alarm_pv_low 4011 Lower Output Alarm Lower Output Alarm- Sets the lower limit of Output Alarm R/W Float 2048
alarm_pv_high 4012 Upper Output Alarm Upper Output Alarm- Sets the upper limit of Output Alarm R/W Float 2048
alarm_temp_conf 4013 Sensor Temp. Alarm Sensor Temp. Alarm- Configures the temperature alarm ON/OFF. --No Alarm: Do not use the sensor temperature alarm. --Lower Limit: If the sensor temperature is below the lower limit for the sensor temperature alarm, the alarm is activated. --Upper Limit: If the sensor temperature is above the upper limit for the sensor temperature alarm, the alarm is activated. --Lower/Upper Limit: If the sensor temperature is either below the lower limit or above the upper limit for the sensor temperature alarm, the alarm is activated. R/W Enum 2048
alarm_temp_low 4014 Lower Sensor Temp. Alarm Lower Sensor Temp. Alarm- Sets the lower limit of Sensor Temp. Alarm. R/W Float 2048
alarm_temp_high 4015 Upper Sensor Temp. Alarm Upper Sensor Temp. Alarm- Sets upper limit of Sensor Temp. Alarm. R/W Float 2048
co_type 4016 Contact Output Mode Contact Output Mode- Selects the contact output mode either Normally Open or Normally Closed. --Normally Open: Sets the contact output circuit to normally open, and when the alarm is detected, become closed. --Normally Closed: Sets the contact output circuit to normally closed, and when the alarm is detected, become open. R/W Enum 2048
Name ID Label Description Type Access Class