Loading…
Name ID Label Description Type Access Class
alarm_select 4017 Contact Output ON/OFF Contact Output ON/OFF- Selects the alarms to reflect the contact output. R/W BitEnum 2048
disp_mode 4018 Display Mode Display Mode- Sets the displayed units for the device indicator. --%: Displays the currently measured pressure as a percentage of the preset measuring range. --Pressure: Displays the currently measured pressure in the selected pressure unit. --Scale: Displays the measured value in user-selected or user-defined units (flow rate, level etc.) R/W Enum 256
disp_sqrt 4019 Display Function Display Function- Sets the display conformity of device. --Linear: Displays PV by linear scale. --Square root: Displays flow (square root extraction). R/W Enum 256
disp_unit 401A Disp. Unit Disp. Unit- Selects engineering unit displayed in the indicator of device. Valid when Scale is selected in Display Mode. R/W Enum 256
disp_exponent 401B Exponent Exponent- Selects the exponent(X10, X100, etc) displayed in the indicator of device. Valid when Scale is the selected in Display Mode. R/W Enum 256
cutoff_mode 401C Cutoff Mode Cutoff Mode- Displays the status of Cutoff mode. --Def (7.1%Lin): Cutoff mode is default. (Flow mode is default, dropout is linear, and cutoff point is 7.1%) --Zero Flow:Def: Dropout is zero, and flow mode is default. --Lin. Flow:Def: Dropout is linear, and flow mode is default --Zero Flow:Bi-dir: Dropout is zero, and flow mode is bi-directional. --Lin. Flow:Bi-dir: Dropout is linear, and flow mode is bi-directional. --Dropout: Selects behavior below the cutoff value. Selects either zero or linear. --Flow mode: Selects calculation method of flow output.Selects either default (square root of positive output) or bi-direction (square root of both positive and negative outputs.) R Enum 64
dropout_point 401D Cutoff Point Cutoff Point- Displays the cutoff point (%) valid when Transfer function is the selected Square Root. R/W Float 64
eu_lower_value 401E EULO (0%) EULO (0%)- The value displayed in the indicator of device when the output of the device is 0%. Valid when Scale is selected in Display Mode. R/W Float 256
eu_upper_value 401F EUHI (100%) EUHI (100%)- The value displayed in the indicator of device when the output of the device is 100%. Valid when Scale is selected in Display Mode. R/W Float 256
out_lower_limit 4020 Output Low Limit Output Low Limit- The output limit of Lower value (0%). R/W Float 64
Name ID Label Description Type Access Class