Loading…
Name ID Label Description Type Access Class
levelDampingValue 400A Lvl damp Damping Value- Damping time constant applied to both the Digital Value representation and Analog Value of the respective Analog Output. The units of this variable are always in seconds. Pressure- Pressure of the process measured with respect to a reference pressure. R/W Float 0
levelUpdatePeriod 4068 Lvl Update Period R Time 0
levelSerialNumber 400C Lvl snsr s/n Sensor Serial Number- Uniquely identifies the sensor from which the Digital Value representation or Field Device variable is primarily derived. R Unsigned 2048
levelLowerTrimPoint 400D Lvl Lower trim Lower Trim Point- Applied process input at which the last lower trim of the device variable was performed. R Float 0
levelUpperTrimPoint 400E Lvl Upper trim Upper Trim Point- Applied process input at which the last upper trim of the device variable was performed. R Float 0
levelTrimSupport 400F Lvl Trim support Trim Points Supported- Indicates the trim points that are supported by the device variable during a trim procedure. R Enum 0
levelMinimumLTP 4010 Lvl Min lower trim Minimum Lower Trim Point- The lowest applied process value that can be used duirng a low trim procedure (ie, no value lower than this will be accepted by the instrument). R Float 0
levelMaximumLTP 4011 Lvl Max lower trim Maximum Lower Trim Point- The highest applied process value that can be used duirng a low trim procedure (ie, no value higher than this will be accepted by the instrument). R Float 0
levelMinimumUTP 4012 Lvl Min upper trim Minimum Upper Trim Point- The lowest applied process value that can be used duirng a high trim procedure (ie, no value lower than this will be accepted by the instrument). R Float 0
levelMaximumUTP 4013 Lvl Max upper trim Maximum Upper Trim Point- The highest applied process value that can be used duirng a high trim procedure (ie, no value higher than this will be accepted by the instrument). R Float 0
Name ID Label Description Type Access Class