Loading…
Loading…
Name | ID | Label | Description | Type | Access | Class |
---|---|---|---|---|---|---|
response_code | 0096 | Response code | Command Specific Response Code- Data that is returned in the Field Device response, that indicates the relative success of the Command sent in the Host request. This information may relate to the Data of the Host request or to the command itself. | R | Enum | 129 |
comm_status | 0098 | Communication status | Communications Error Summary- The Field Device has detected the following error condition while attempting to receive the Host request. Therefore the Command was not accepted, and the Host request caused no change to occur in the Field Device. | R | BitEnum | 131 |
request_preambles | 009B | Number of Request Preambles | Number of Request Preambles- Number of Preambles required from the Host request by the Field Device | R | Unsigned | 128 |
universal_revision | 009C | Universal Revision | Universal Revision- Revision of the Universal Device Description, that the Field Device conforms to | R | Unsigned | 128 |
transmitter_revision | 009D | Field Device Revision | Field Device Revision- Revision of the Field Device Specific Device Description, that the Field Device conforms to | R | Unsigned | 128 |
software_revision | 009E | Software Revision | Field Device Software Revision- This revision corresponds to the software or firmware, that is embedded in the Field Device | R | Unsigned | 2048 |
hardware_revision | 009F | Hardware Revision | Hardware Revision- Revision that corresponds to the electronics hardware of the Field Device. | R | Unsigned | 2048 |
device_id | 00A1 | Device ID | Field Device Identification- Uniquely identifies the Field Device when combined with the Manufacturer Identification and Device Type. Therefore, this variable cannot be modified by the Host user. | R | Unsigned | 2048 |
response_preambles | 0FE2 | Num resp preams | Number of Response Preambles- Number of Preambles to be sent in the response message from the Field Device to the Host | R | Unsigned | 128 |
max_num_device_variables | 00CE | Max dev vars | Maximum Number of Device Variables- This indicates the last Device Variable code that a host application should expect to be found in the field device (e.g., when identifying the Device Variables using Command 54) | R | Unsigned | 2048 |
config_change_counter | 00CF | Cfg chng count | Configuration Change Counter- This indicates the number of times the devices configuration or calibration has been changed by a host application or from a local operator interface. | R | Unsigned | 2050 |
tag | 00A3 | Tag | Tag- Text that is associated with the Field Device installation. This text can be used by the user in any way. A recommended use is as a unique label to a plant that correlates to a Field Device label: a plant drawing, or on a Control System. This variable is also used as a type of data link layer address handle. | R/W | PackedAscii | 2048 |
longTag | 00D2 | Long Tag | Long Tag- Functions exactly like Tag except the size is larger (max of 32 ISO Latin 1 characters). | R/W | ASCII | 2048 |
device_variable_code_1 | 00E1 | R/W | Index | 4096 | ||
device_variable_code_2 | 00E2 | R/W | Index | 4096 | ||
device_variable_code_3 | 00E3 | R/W | Index | 4096 | ||
device_variable_code_4 | 00E4 | R/W | Index | 4096 | ||
device_variable_code_5 | 0100 | R/W | Index | 4096 | ||
device_variable_code_6 | 0101 | R/W | Index | 4096 | ||
device_variable_code_7 | 0102 | R/W | Index | 4096 | ||
device_variable_code_8 | 0103 | R/W | Index | 4096 | ||
time_stamp | 00FE | Time Stamp | Relative time value on network | R | Time | 2050 |
polling_address | 00A2 | Polling Address | Polling Address- Address used by the Host to identify a Field Device, and changeable by the User to control: the Multidrop Mode for Analog Output 1), and the Analog Output Fixed Mode of Analog Output 1) | R/W | Unsigned | 128 |
message | 00A4 | Message | Message- Text that is associated with the Field Device. This text can be used by the user in any way. There is no recommended use. | R/W | PackedAscii | 2048 |
descriptor | 00A5 | Descriptor | Descriptor- Text that is associated with the Field Device. This text can be used by the user in any way. There is no specific recommended use. | R/W | PackedAscii | 2048 |
date | 00A6 | Date | Date- Gregorian calendar date that is stored in the Field Device. This date can be used by the user in any way. There is no specific recommended use. | R/W | HartDate | 2048 |
final_assembly_number | 00A9 | Final Assembly Number | Final Assembly Number- Number that is used for identification purposes, and is associated with the overall Field Device. | R/W | Unsigned | 2048 |
device_specific_status_0 | 102B | Status Group 0 | R | BitEnum | 2051 | |
device_specific_status_1 | 102C | Status Group 1 | R | BitEnum | 2051 | |
device_specific_status_2 | 102D | Status Group 2 | R | BitEnum | 2051 | |
device_specific_status_3 | 102E | Status Group 3 | Field Device Specific Status Byte 4- Data that has Field Device status information relating to: failures / warnings / status of process's. | R | BitEnum | 2051 |
device_specific_status_4 | 102F | Status Group 4 | Field Device Specific Status Byte 5- Data that has Field Device status information relating to: failures / warnings / status of process's. | R | BitEnum | 2051 |
device_specific_status_5 | 1030 | Status Group 5 | Field Device Specific Status Byte 6- Data that has Field Device status information relating to: failures / warnings / status of process's. | R | BitEnum | 2051 |
loopCurrent | 00ED | Loop current | Loop Current- Loop current value as perceived by the device. | R/W | Float | 66 |
loop_alarm_code | 00EC | AO Alrm typ | Selects the Analog Output 1 commanded in an alarm condition .choices are:Low=3.7mA, or High =22.5mA. | R/W | Enum | 64 |
loop_flags | 00E7 | Channel flags | Analog Channel Flags- Defines the characteristics of the Analog Channel | R | BitEnum | 64 |
percentRange | 00E9 | PV % Range | Percent of Range- Variable that tracks the Digital Value representation with respect to the range defined by the Lower Range Value and Upper Range Value, for normal operating modes. The units of this variable are always in percent. | R | Float | 34 |
transfer_function | 1F84 | Xfer fnctn | Transfer Function- Defines the transformation function that will be applied from the Field Device Variable to the Analog Output, and Percent Range. The Transfer Function does not affect the Digital Value representation. | R | Enum | 32 |
upperRange_value | 00EA | Upper Range Value | Upper Range Value- Defines the operational endpoint from which the Analog Value, and the 100% point of the Percent Range are derived. In addition, the Upper Range Value defines an operational endpoint which the alarms associated with the Analog Value, and the alarms associated with the Digital Value representation are derived. | R/W | Float | 32 |
lowerRange_value | 00EB | Lower Range Value | Lower Range Value- Defines the operational endpoint from which the Analog Value, and the 0% point of the Percent Range are derived. In addition, the Lower Range Value defines an operational endpoint which the alarms associated with the Analog Value, and the alarms associated with the Digital Value representation are derived. | R/W | Float | 32 |
primary_variable_code | 0FD0 | PV is | Primary Index into Dynamic Variables Array- An index location, that indicates which Field Device dynamic variable has been mapped into the Primary Variable dynamic variable | R/W | Index | 128 |
secondary_variable_code | 0FD1 | SV is | Secondary Index into Dynamic Variables Array- An index location, that indicates which Field Device dynamic variable has been mapped into the Secondary Variable dynamic variable | R/W | Index | 128 |
tertiary_variable_code | 0FD2 | TV is | Tertiary Index into Dynamic Variables Array- An index location, that indicates which Field Device dynamic variable has been mapped into the Tertiary Variable dynamic variable | R/W | Index | 128 |
quaternary_variable_code | 1082 | QV is | Quaternary Index into Dynamic Variables Array- An index location, that indicates which Field Device dynamic variable has been mapped into the Quaternary Variable dynamic variable | R/W | Index | 128 |
Name | ID | Label | Description | Type | Access | Class |