Loading…
Loading…
Name | ID | Label | Description | Type | Access | Class |
---|---|---|---|---|---|---|
process_data_status | 0804 | R/W | Enum | 4096 | ||
limit_status | 0805 | R/W | Enum | 4096 | ||
device_family_status | 0806 | R/W | Enum | 4096 | ||
country_code_codes | 08D3 | R/W | Enum | 4096 | ||
device_power_status_codes | 08D4 | R/W | Enum | 4096 | ||
master_mode_code | 08D5 | R/W | Enum | 4096 | ||
device_status | 0097 | Device Status | Shows the current Device Status | R | BitEnum | 131 |
write_protect | 00A7 | Write Protect | Write Protect Mode- Indicates whether variables can be written to the Field Device, or whether commands that cause actions, to be performed in the Field Device, can or cannot occur. Depending on the Field Device, this is a mode that is controllable by the user, either via the Field Device hardware or the HART Protocol. | R | Enum | 2048 |
physical_signaling_code | 00AB | Physicl signl code | Physical Signaling Code- The Physical Signaling Code describes the type of Physical Layer that has been implemented in the hardware that is responsible for the HART Communication port | R | Enum | 2048 |
operatingMode | 0870 | Operate mode 1 | Field Device Specific Operating Mode 1- A possible mode of operation in Field Device | R | Enum | 2049 |
loop_current_mode | 0808 | Loop current mode | Modo de corriente de lazo: Indica si la corriente de lazo es activa o fija (es decir, el dispositivo está en derivaciones múltiples). | R/W | Enum | 64 |
device_flags | 00A0 | Dev flags | Field Device Flags- Describes special features of the Field Device that affect the Data Link Layer | R | BitEnum | 2048 |
extended_fld_device_status | 0807 | Ext. Device Status | Provides additional Device Status informations | R | BitEnum | 131 |
device_profile | 00FF | Device Profile | R | Enum | 2048 | |
standardized_status_0 | 0104 | Device Diagnostic Status 0 | Status commonly used in a wide range of devices and device types | R | BitEnum | 131 |
standardized_status_1 | 0105 | Device Diagnostic Status 1 | Status commonly used in a wide range of devices and device types | R | BitEnum | 131 |
standardized_status_2 | 0106 | I/O and Subdevice Status | R | BitEnum | 131 | |
standardized_status_3 | 0107 | WirelessHART Status | R | BitEnum | 131 | |
analog_channel_saturated1 | 103D | AO saturated | Field Device Specific Dynamic Variable Analog Output Saturated- Data that indicates which of the Analog Outputs are, or are not, saturated. The analog and digital Analog Outputs for the Dynamic Variable are beyond their limits and no longer represent the true applied process. | R | BitEnum | 2051 |
analog_channel_fixed1 | 1040 | AO fixed | Field Device Specific Dynamic Variable Analog Output Fixed- Data that indicates which of the Analog Outputs are, or are not, Fixed. The analog and digital Analog Outputs for the Dynamic Variable are held at a constant value (depending on the Mode of the Field Device). They will not respond to the applied process. | R | BitEnum | 2051 |
time_set | 1157 | Time Set Option | W | Enum | 2052 | |
real_time_clock_flag | 115C | Real Time Clock Flags | R | BitEnum | 2050 | |
country_code | 1259 | Country | Country of intended device installation | R/W | Enum | 2048 |
si_control | 125A | SI Unit Control | Indicates if device should only display SI unit codes | R/W | Enum | 2048 |
burst_trigger_units | 1267 | Burst Trigger Units | R/W | Enum | 16 | |
burst_trigger_classification | 1266 | Burst Trigger Class | R/W | Enum | 16 | |
burst_mode_select | 0FFF | Burst mode | Burst Mode Select- Selects the mode for the Burst Mode functionality. If Burst is enabled the Field Device will generate HART messages on the Link without individual requests from the Host. | R/W | Enum | 128 |
burst_message_trigger_mode | 08D8 | Burst Msg Trigger Mode | R/W | Enum | 128 | |
event_status | 08D9 | Event Status | R | BitEnum | 130 | |
event_notification_control_n | 08DA | Event Notification Control | R/W | Enum | 128 | |
dev_operating_mode_mask | 08F9 | Operate mode Mask | R/W | BitEnum | 2048 | |
lock_device_code | 106F | Lock dev code | Código de bloqueo del dispositivo: Indica si el dispositivo se ha colocado en posición de bloqueo para evitar que se hagan cambios manualmente o desde otro maestro. | W | Enum | 2048 |
lock_device_status_code | 1070 | Lock Status | Shows the current lock state of the device. Device is locked: Device is locked and the configuration can only be unlocked by the host that activates the lock. Lock is permanent: Device lock will sustain a device restart / reset Locked by primary Master: Device is locked by a primary master. Only a primary Master can unlock the device. Locked for All: Device is locked for all masters. Any master can unlock the device. | R | BitEnum | 2048 |
power_source | 36CC | Power Source | Power source of the device | R | Enum | 128 |
wireless_mode | 36BB | Wireless Mode | R | Enum | 2050 | |
join_status | 36BC | Join Status | The current location in the joining sequence of operations. | R | BitEnum | 2050 |
network_access_mode | 36E4 | Network Access Mode | R/W | Enum | 128 | |
join_mode | 36C3 | Join Mode | R/W | Enum | 128 | |
device_power_status | 36DB | Power Status | Power status of the device | R | Enum | 2050 |
master_mode | 1091 | Master Mode | This sets the I/O System's Data Link Layer operation on all channels as either primary or secondary master mode. | R/W | Enum | 128 |
trend_digital_units | 1166 | Trend Units | Trend Device Variable Unit Code | R | Enum | 2052 |
trend_classification | 1165 | Trend Classification | Trend Device Variable Classification | R | Enum | 2052 |
trend_control | 1163 | Trend Control | R/W | Enum | 132 | |
manufacturer_id | 0099 | Fabricante | Código de identificación del fabricante: Hace referencia a un fabricante específico y suele ser el nombre de la empresa responsable de la fabricación de este dispositivo de campo. | R | Enum | 128 |
private_label_distributor | 00A8 | Distribuidor | Private Label Distributor- References the company that is responsible for the distribution of this Field Device to customers | R | Enum | 2048 |
device_type | 009A | Model | Model- References the type of Field Device, usually an advertised model number, that is unique to a single manufacturer | R | Enum | 128 |
device_status_mask | 08DB | Device Status Mask | R/W | BitEnum | 2048 | |
extended_fld_device_status_mask | 08DC | Ext dev status Mask | R/W | BitEnum | 2048 | |
standardized_status_0_mask | 08DD | Device Diagnostic Status 0 Mask | R/W | BitEnum | 2048 | |
standardized_status_1_mask | 08DE | Device Diagnostic Status 1 Mask | R/W | BitEnum | 2048 | |
Name | ID | Label | Description | Type | Access | Class |