Loading…
Name ID Label Description Type Access Class
relayPDQ 4045 Relay PDQ Process Data Quality- Indicates the overall process data quality of the device variable value. R Enum 10
relayLS 4046 Relay LS Limit Status- Indicates whether the device variable is limited (i.e., not responding to a process). R Enum 10
relayStatus 4047 Relay Fmly stat Device Family Status- Indicates additional status information on a device variable for a specific device family. R BitEnum 10
relayUSL 4048 Relay USL Upper Sensor Limit Value- Defines the maximum usable value for the Upper Range Value. R Float 0
relayLSL 4049 Relay LSL Lower Sensor Limit Value- Defines the minimum usable value for the Lower Range Value. R Float 0
relayMinimumSpan 404A Relay min span Minimum Span Value- Defines the smallest allowable difference between the Upper Range Value and the Lower Range Value. R Float 0
relayDampingValue 404B Relay Damp Damping Value- Damping time constant applied to both the Digital Value representation and Analog Value of the respective Analog Output. The units of this variable are always in seconds. R Float 0
relaySerialNumber 404C Relay snsr s/n Sensor Serial Number- Uniquely identifies the sensor from which the Digital Value representation or Field Device variable is primarily derived. R Unsigned 2048
relayLowerTrimPoint 404D Relay Lower trim Lower Trim Point- Applied process input at which the last lower trim of the device variable was performed. R Float 0
relayUpperTrimPoint 404E Relay Upper trim Upper Trim Point- Applied process input at which the last upper trim of the device variable was performed. R Float 0
Name ID Label Description Type Access Class