Loading…
Name ID Label Description Type Access Class
percentLS 4013 Percent LS Limit Status- Indicates whether the device variable is limited (i.e., not responding to a process). R Enum 10
percentStatus 4014 Percent Fmly stat Device Family Status- Indicates additional status information on a device variable for a specific device family. R BitEnum 10
percentUSL 4015 % water USL Upper Sensor Limit Value- Defines the maximum usable value for the Upper Range Value. R Float 0
percentLSL 4016 % water LSL Lower Sensor Limit Value- Defines the minimum usable value for the Lower Range Value. R Float 0
percentMinimumSpan 4017 % water min span Minimum Span Value- Defines the smallest allowable difference between the Upper Range Value and the Lower Range Value. R Float 0
percentDampingValue 4018 water Cut Damp Damping Value- Damping time constant applied to both the Digital Value representation and Analog Value of the respective Analog Output. The units of this variable are always in seconds. R Float 0
percentSerialNumber 4019 % water snsr s/n Sensor Serial Number- Uniquely identifies the sensor from which the Digital Value representation or Field Device variable is primarily derived. R Unsigned 2048
percentLowerTrimPoint 401A Percent Lower trim Lower Trim Point- Applied process input at which the last lower trim of the device variable was performed. R Float 0
percentUpperTrimPoint 401B Percent Upper trim Upper Trim Point- Applied process input at which the last upper trim of the device variable was performed. R Float 0
percentTrimSupport 401C Percent Trim support Trim Points Supported- Indicates the trim points that are supported by the device variable during a trim procedure. R Enum 0
Name ID Label Description Type Access Class