Loading…
Name ID Label Description Type Access Class
primary_measurement_upper_range_value 4019 URV Upper range value - Defines the operational endpoint from which the variables ANALOG_VALUE, PERCENT_RANGE are derived. R/W Float 32
primary_measurement_lower_range_value 401A LRV Lower range value - Defines the operational endpoint from which the variables ANALOG_VALUE, PERCENT_RANGE are derived. R/W Float 32
primary_measurement_damping_value 4027 Damp Damping value - Damping time applied to both the variables DIGITAL_VALUE and ANALOG_VALUE of output 'X'. The units of this variable are always expressed in seconds. R/W Float 32
sensor_serial_number 4040 Snsr s/n Sensor Serial Number- Uniquely identifies the sensor from which the Digital Value representation or Field Device variable is primarily derived. R/W Unsigned 2048
primary_measurement_upper_sensor_limit 401B USL Upper sensor limit value - Value that defines the absolute upper endpoint (largest magnitude) for the UPPER RANGE VALUE. R Float 8
primary_measurement_lower_sensor_limit 401C LSL Lower sensor limit value - Value that defines the absolute lower endpoint (smallest magnitude) for the LOWER RANGE VALUE. R Float 8
primary_measurement_minimum_span 401D Min span Minimum span value - Value that defines the smallest absolute value for the resulting figure derived from the following equation (UPPER RANGE VALUE - LOWER RANGE VALUE). R Float 8
ma_analog_output_value 4041 AO Analog Output- Measurable physical output which changes with respect to time, without user intervention R/W Float 66
ma_analog_output_alarm_select 4042 Alarm type Analog Output Alarm Type- Defines how the Analog Output will respond when the Field Device detects that the Analog Output may not be tracking the associated Field Device Variable. NOTE- The Digital Value representation may not be determinate. R Enum 64
electronics_temperature_digital_units 4025 CJC temp unit Temp. unit of the reference junction temperature - The temperature on the terminal block of the field unit is always stated in °C during measurements with internal or external reference junction. R Enum 34
electronics_temperature_digital_value 4008 CJC temp Reference junction temperature value - Temperature associated with the internal/external reference junction. At an internal reference junction the temperature of the connection terminals of the transmitter will be measured during measurements. R/W Float 34
sensor1_digital_units 401F Unit Unit - physical unit in which the electrical value of the sensor is expressed. R Enum 34
sensor1_measurement_digital_value 4020 Snsr1 Sensor value - electrical value of the sensor at the input. R Float 34
sensor2_digital_units 4022 Unit Unit - physical unit in which the electrical value of the sensor is expressed. R Enum 34
sensor2_measurement_digital_value 4023 Snsr2 Sensor value - electrical value of the sensor at the auxiliary input. R Float 34
units_code 07E9 R/W Enum 4096
transfer_function_code 07EA R/W Enum 4096
alarm_selection_code 07EB R/W Enum 4096
write_protect_code 07EE R/W Enum 2048
company_identification_code 07EF R/W Enum 128
flag_assignment 07F2 R/W Enum 128
operating_mode_code 07F3 R/W Enum 2048
response_code 0096 Command Specific Response Code- Data that is returned in the Field Device response, that indicates the relative success of the Command sent in the Host request. This information may relate to the Data of the Host request or to the command itself. R/W Enum 129
comm_status 0098 Communications Error Summary- The Field Device has detected the following error condition while attempting to receive the Host request. Therefore the Command was not accepted, and the Host request caused no change to occur in the Field Device. R/W BitEnum 131
device_status 0097 Field Device Status- Data indicating that the Field Device has detected condition(s) in the Field Device relating to: its hardware / the validity of a variable / its operating status / an internal process R/W BitEnum 131
Name ID Label Description Type Access Class