Loading…
Name ID Label Description Type Access Class
_failure_signal 4037 Signalling Signalling - The setting determines if a failure shall be signalled via the analog output. R/W Enum 4096
_version 403A Version 1.00 R Enum 4096
digital_units 4017 単位 ﾌｨｰﾙﾄﾞ機器ﾊﾞﾘｱﾌﾞﾙ単位 - 単位はﾃﾞｼﾞﾀﾙ値, 最小ｽﾊﾟﾝ, Upper ﾚﾝｼﾞ値, Lower ﾚﾝｼﾞ値, Lower ｾﾝｻｰ ﾘﾐｯﾄ, Upper ｾﾝｻｰ ﾘﾐｯﾄの表示に使用されます。 R/W Enum 32
primary_measurement_digital_value 4018 Measured value - Measured value that changes magnitude with respect to time with no user intervention. R Float 34
primary_measurement_percent_range 403F Percent of range - Digital value that is proportional to the variable DIGITAL_VALUE with respect to the range defined by the LOWER_RANGE_VALUE and UPPER_RANGE_VALUE. The units of this variable are always in percent. R Float 34
analog_output_transfer_function 4040 伝送ﾀｲﾌﾟ 伝送ﾀｲﾌﾟ - ﾌｨｰﾙﾄﾞ機器のｱﾅﾛｸﾞ出力とﾊﾟｰｾﾝﾄ ﾚﾝｼﾞの伝送ﾀｲﾌﾟを定義します。これはﾃﾞｼﾞﾀﾙ値表示には影響しません。 R Enum 32
primary_measurement_upper_range_value 4019 URV Upper range value - Defines the operational endpoint from which the variables ANALOG_VALUE, PERCENT_RANGE are derived. R/W Float 32
primary_measurement_lower_range_value 401A LRV Lower range value - Defines the operational endpoint from which the variables ANALOG_VALUE, PERCENT_RANGE are derived. R/W Float 32
primary_measurement_damping_value 4027 ﾀﾞﾝﾋﾟﾝｸﾞ Damping value - Damping time applied to both the variables DIGITAL_VALUE and ANALOG_VALUE of output 'X'. The units of this variable are always expressed in seconds. R/W Float 32
sensor_serial_number 4041 ｾﾝｻｰ S/N ｾﾝｻｰ ｼﾘｱﾙ ﾅﾝﾊﾞｰ - ﾃﾞｼﾞﾀﾙ値表示又はﾌｨｰﾙﾄﾞ機器ﾊﾞﾘｱﾌﾞﾙを主に導出するｾﾝｻｰを一意に識別します。 R/W Unsigned 2048
Name ID Label Description Type Access Class