Loading…
Name ID Label Description Type Access Class
alter_value 400C Default value Default value - in case of failure, the analog output is set on the programmed value if the matching error strategy was selected. R/W Float 8
sensor_name 400F Sensor name Sensor name - The function permits the input of a sensor name when using user defined characteristics. R/W PackedAscii 8
order_no 4010 Catalog number Catalog number - The function permits the changing of the catalog number after entering changes on transmitter. R/W PackedAscii 2048
kanal 4013 Signal input Signal input - The setting determines the signal input which must be balanced. W Unsigned 8
sollwert 4014 ｾｯﾄ ﾎﾟｲﾝﾄ Set point - The value states the (e.g. simulated via a reference) input signal. W Float 8
_input_range 402F Input assignment Input assignment - measuring range of the transmitter at the input. W Enum 4096
_local_messart 4030 Type of measurement Type of measurement - The setting determines, whether single- or multi-channel measurement is active. R/W Enum 4096
_type_of_refer_junc 4031 Reference junction Reference junction - The setting determines the type of reference junction during measurements with thermocouples. Always select 'WITHOUT' for measurements witout thermocouples. W Enum 4096
_sensor_monitor 4032 Sensor monitoring Sensor monitoring - With this setting the monitoring of the sensors can be limited or released. An internal reference junction is always monitored. W Enum 4096
_failure_control 4036 Failure monitoring Failure monitoring - The setting determines if the analog output should react to certain failure states in the transmitter. R/W Enum 4096
Name ID Label Description Type Access Class