Loading…
名称 ID 标签 描述 类型 访问 分类
primary_measurement_upper_sensor_limit 401B USL Upper sensor limit value - Value that defines the absolute upper endpoint (largest magnitude) for the UPPER RANGE VALUE. 读 浮点 8
primary_measurement_lower_sensor_limit 401C LSL Lower sensor limit value - Value that defines the absolute lower endpoint (smallest magnitude) for the LOWER RANGE VALUE. 读 浮点 8
primary_measurement_minimum_span 401D 最小范围 Minimum span value - Value that defines the smallest absolute value for the resulting figure derived from the following equation (UPPER RANGE VALUE - LOWER RANGE VALUE). 读 浮点 8
ma_analog_output_value 4042 模拟量输出 模拟量输出——在没有用户干扰的情况下，根据时间变化的可测量物理输出。 读/写 浮点 66
ma_analog_output_alarm_select 4043 Alarm type 模拟量输出报警类型——定义当现场设备检测到模拟量输出可能未跟踪关联现场设备变量时模拟量输出响应的方式。注意——数值表示可能不确定。 读 枚举 64
electronics_temperature_digital_units 4025 CJC温度单位 Temp. unit of the reference junction temperature - The temperature on the terminal block of the field unit is always stated in °C during measurements with internal or external reference junction. 读 枚举 34
electronics_temperature_digital_value 4008 CJC温度 Reference junction temperature value - Temperature associated with the internal/external reference junction. At an internal reference junction the temperature of the connection terminals of the transmitter will be measured during measurements. 读/写 浮点 34
sensor1_digital_units 401F 单位 Unit - physical unit in which the electrical value of the sensor is expressed. 读 枚举 34
sensor1_measurement_digital_value 4020 传感器1 Sensor value - electrical value of the sensor at the input. 读 浮点 34
sensor2_digital_units 4022 单位 Unit - physical unit in which the electrical value of the sensor is expressed. 读 枚举 34
名称 ID 标签 描述 类型 访问 分类