Loading…
Name ID Label Description Type Access Class
var_TB82_user_defined_conc_y2 4017 y2 Concen y2 Concentration point corresponding to x1 Conductivity in the user defined concentration curve R/W Float 8
var_TB82_user_defined_conc_y3 4019 y3 Concen y3 Concentration point corresponding to x1 Conductivity in the user defined concentration curve R/W Float 8
var_TB82_user_defined_conc_y4 401B y4 Concen y4 Concentration point corresponding to x1 Conductivity in the user defined concentration curve R/W Float 8
var_TB82_user_defined_conc_y5 401D y5 Concen y5 Concentration point corresponding to x1 Conductivity in the user defined concentration curve R/W Float 8
var_TB82_user_defined_conc_y6 401F y6 Concen y6 Concentration point corresponding to x1 Conductivity in the user defined concentration curve R/W Float 8
var_TB82_lcd_secondary 402A LCD secondry disp The parameter sets the HMI's local LCD secondary display area to one of several options. R/W Enum 256
var_TB82_security_lock 402B Security Lock When ENABLED, the Security Password will be active for Security mode on local HMI. If Security Lock is disabled, then the Security mode of operation can be accessed from the local HMI without supplying the password. R/W Enum 2048
var_TB82_configuration_lock 402C Configuration Lock When ENABLED, the Security Password will be active for Config mode on local HMI. Config parameters will be write protected on the HART interface. When the Configuration-Lock is DISABLED, the Config mode of operation can be accessed from the local HMI without supplying the password R/W Enum 2048
var_TB82_calibration_lock 402D Calibration Lock When ENABLED, the Security Password will be active for Calibrate mode on local HMI. Calib parameters will be write protected on the HART interface. When the Calibration Lock is DISABLED, the Calibrate mode of operation can be accessed from the local HMI without supplying the password R/W Enum 2048
var_TB82_output_lock 402E Output Lock When ENABLED, the Security Password will be active for Output mode on local HMI. Output related parameters will be write protected on the HART interface. When the Output Lock is DISABLED, the Output mode of operation can be accessed from the local HMI without supplying the password R/W Enum 2048
Name ID Label Description Type Access Class