Loading…
Loading…
Name | ID | Label | Description | Type | Access | Class |
---|---|---|---|---|---|---|
var_TB82_solution | 4010 | Solution type | The solution type defines the solute algorithm used for concentration configurations. Both predefined and user-defined concentration configurations are available. The available solution types are: 0 to 15% NaOH, 0 to 20% NaCl, 0 to 18% HCl, 0 to 20% H2SO4, User Defined. | R/W | Enum | 8 |
var_TB82_usrdef_secondary | 4011 | Concen curve name | This is a six character text name for the concentration curve. It could be modified in user-defined concentration configuration | R/W | ASCII | 2048 |
var_TB82_usrdef_unit | 4012 | User def conc unit | Engineering units for user defined concentration curve This will be used as the concentration value units when a user defined concentration curve is selected. | R/W | Enum | 8 |
var_TB82_concentration_range | 4013 | Concen range | The concentration range can be set when the solution type is set to user defined. For all other solution types it is read-only | R/W | Enum | 8 |
var_TB82_temp_sensor_type | 4020 | Temp snsr type | Temperature sensor type | R/W | Enum | 8 |
var_TB82_temp_comp_type | 4021 | Temp comp type | Determines the type of Temperature Compensation algorithm applied to the Primary Value | R/W | Enum | 8 |
var_TB82_manual_temp_setpoint_unit | 4040 | Dimension bei manueller Temp. | R/W | Enum | 8 | |
var_TB82_manual_temp_setpoint | 4025 | Manuelle Temp. | Manual Temperature value is used in the temp comp algorithm when the temp comp type is MANUAL. | R/W | Float | 8 |
var_TB82_temp_auto_sol | 4022 | Auto TC option | This is valid when temp comp type is Automatic.The Automatic Temperature Compensation option applies an algorithm that adjusts for the temperature effect on conductivity, which is dependent on the selected solute. The available options are: Std KCl, TC Coeff, NaOH, NaCl, HCl, H2SO4, User Defined. | R/W | Enum | 8 |
var_TB82_tc_coef | 4023 | Temp comp coeff | Temperature Compensation Coefficient: This is valid when tem-comp type is Automatic and Auto TC option is TC-coeff. The Temp Coeff is applied as percent of change of conductivity from a reference temp per deg C. Valid range is 0 to 9.99% per deg C. | R/W | Float | 8 |
Name | ID | Label | Description | Type | Access | Class |