Loading…
Name ID Label Description Type Access Class
var_TB82_configuration_lock 402F Configuration Lock When ENABLED, the Security Password will be active for Config mode on local HMI. Config parameters will be write protected on the HART interface. When the Configuration-Lock is DISABLED, the Config mode of operation can be accessed from the local HMI without supplying the password R/W Enum 2048
var_TB82_calibration_lock 4030 Calibration Lock When ENABLED, the Security Password will be active for Calibrate mode on local HMI. Calib parameters will be write protected on the HART interface. When the Calibration Lock is DISABLED, the Calibrate mode of operation can be accessed from the local HMI without supplying the password R/W Enum 2048
var_TB82_output_lock 4031 Output Lock When ENABLED, the Security Password will be active for Output mode on local HMI. Output related parameters will be write protected on the HART interface. When the Output Lock is DISABLED, the Output mode of operation can be accessed from the local HMI without supplying the password R/W Enum 2048
var_TB82_password_digit_1 4081 Secur. Passwrd 1 Three password digits form the Security Password. Each digit can have a value from 0 to 9. The 3-digit Password range is 000 to 999. When Secur, Config, Output or Calib Locks are ENABLED, this Security Password will be required at the local HMI to access the corresponding modes of operation. R/W Unsigned 2048
var_TB82_password_digit_2 4082 Secur. Passwrd 2 Three password digits form the Security Password. Each digit can have a value from 0 to 9. The 3-digit Password range is 000 to 999. When Secur, Config, Output or Calib Locks are ENABLED, this Security Password will be required at the local HMI to access the corresponding modes of operation. R/W Unsigned 2048
var_TB82_password_digit_3 4083 Secur. Passwrd 3 Three password digits form the Security Password. Each digit can have a value from 0 to 9. The 3-digit Password range is 000 to 999. When Secur, Config, Output or Calib Locks are ENABLED, this Security Password will be required at the local HMI to access the corresponding modes of operation. R/W Unsigned 2048
var_TB82_pv_slope_units 4062 PV slope units R/W Enum 8
var_TB82_pv_slope 4029 PV Slope PV sensor efficiency (slope) value in percent R/W Float 8
var_TB82_pv_offset_units 4045 PV snsr offset unit PV sensor offset unit R/W Enum 8
var_TB82_pv_offset 402A PV offset PV sensor offset value. R/W Float 8
Name ID Label Description Type Access Class