Loading…
Name ID Label Description Type Access Class
pv_units 4000 PV eng. unit Field Device Variable Unit- Engineering unit to be displayed with the Digital Value representation, Minimum Span, Upper Range Value, Lower Range Value, Lower Sensor Limit, and Upper Sensor Limit R/W Enum 8
pv_value 4001 PV Concentration - Field Device Variable Digital value that changes magnitude with respect to time with no user intervention. R Float 10
sensor_upper_range_limit 4002 PV USL Valor límite superior del sensor: Define el valor máximo utilizable para el valor de rango superior. R Float 8
sensor_lower_range_limit 4003 PV LSL Valor límite inferior del sensor: Define el valor mínimo utilizable para el valor de rango inferior. R Float 8
sensor_minimum_span 4004 PV Min span Valor de span mínimo: Define la menor diferencia permitida entre el valor de rango superior y el valor de rango inferior. R Float 8
pv_damping_value 4005 PV Damp Valor de amortiguación: Constante de tiempo de amortiguación que se aplica a la representación del valor digital y al valor analógico de la respectiva salida analógica. Las unidades de esta variable siempre se indican en segundos. R/W Float 8
analog_value 4006 AO Valor de salida analógica: Valor que sigue la representación del valor digital, bajo modos de funcionamiento normales R/W Float 66
fail_mode 4007 AO Alrm typ Analog Output Alarm Type- Defines how the Analog Output will respond when the Field Device detects that the Analog Output may not be tracking the associated Field Device Variable. NOTE- The Digital Value representation may not be determinate. R Enum 64
percent_range 4008 PV % rnge Porcentaje de rango: Variable que rastrea la representación del valor digital con respecto al rango definido por el valor de rango inferior y el valor de rango superior, para modos de funcionamiento normales. Las unidades de esta variable siempre son en porcentaje. R Float 34
transfer_function 1F84 Xfer fnctn Función de transferencia: Define la función de transformación que se aplicará desde la variable de dispositivo de campo a la salida analógica y el rango de porcentaje. La función de transferencia no afecta a la representación del valor digital. R Enum 32
pv_upper_range_value 4009 PV URV Valor de rango superior: Define el punto final de funcionamiento del cual se derivan el valor analógico y el punto 100% del rango de porcentaje. Además, el valor de rango superior define un punto final de funcionamiento del que se derivan las alarmas asociadas con el valor analógico y las alarmas asociadas con la representación del valor digital. R/W Float 32
pv_lower_range_value 400A PV LRV Valor de rango inferior: Define el punto final de funcionamiento del que se derivan el valor analógico, y el punto 0% del rango de porcentaje. Además, el valor de rango inferior define un punto final de funcionamiento del que se derivan las alarmas asociadas al valor analógico y las alarmas asociadas a la representación del valor digital. R/W Float 32
sensor_serial_number 400B PV Snsr s/n Número de serie del sensor: Identifica de manera única el sensor del que se deriva principalmente la representación del valor digital o la variable del dispositivo de campo. R/W Unsigned 2048
temp_unit 400C Temp Unit R Enum 8
temp_value 400D Temp Temperature- In Auto temp comp mode, it is the Temp read with the temp sensor. In Manual temp comp mode, it is the user entered temp value R Float 10
PV_efficiency 4017 PV slope PV sensor slope value R/W Float 8
PV_offset 4018 PV offset PV sensor offset value. R/W Float 8
temp_slope 4019 Temperature sensor Slope Temperature sensor Slope R/W Float 8
temp_offset 401A Temperature sensor offset Temperature sensor offset value. R/W Float 8
one_point_PV_capture 4011 Conc cal value R Float 8
one_point_PV_value 4010 Conc cal value Concentration calibration value W Float 8
temp_cal_value 4013 Temp. calibration value Temperature calibration value W Float 8
units_code 07E9 R/W Enum 4096
transfer_function_code 07EA R/W Enum 4096
alarm_selection_code 07EB R/W Enum 4096
write_protect_code 07EE R/W Enum 4096
company_identification_code 07EF R/W Enum 4096
response_code 0096 Command Specific Response Code- Data that is returned in the Field Device response, that indicates the relative success of the Command sent in the Host request. This information may relate to the Data of the Host request or to the command itself. R/W Enum 129
comm_status 0098 Communications Error Summary- The Field Device has detected the following error condition while attempting to receive the Host request. Therefore the Command was not accepted, and the Host request caused no change to occur in the Field Device. R/W BitEnum 131
device_status 0097 Field Device Status- Data indicating that the Field Device has detected condition(s) in the Field Device relating to: its hardware / the validity of a variable / its operating status / an internal process R/W BitEnum 131
manufacturer_id 0099 Fabricante Código de identificación del fabricante: Hace referencia a un fabricante específico y suele ser el nombre de la empresa responsable de la fabricación de este dispositivo de campo. R Enum 128
device_type 009A Model Model- References the type of Field Device, usually an advertised model number, that is unique to a single manufacturer R Enum 128
request_preambles 009B Num req preams Number of Request Preambles- Number of Preambles required from the Host request by the Field Device R Unsigned 128
universal_revision 009C Universal rev Universal Revision- Revision of the Universal Device Description, that the Field Device conforms to R Unsigned 128
transmitter_revision 009D Fld dev rev Field Device Revision- Revision of the Field Device Specific Device Description, that the Field Device conforms to R Unsigned 128
software_revision 009E Software rev Field Device Software Revision- This revision corresponds to the software or firmware, that is embedded in the Field Device R Unsigned 2048
hardware_revision 009F Hardware rev Revisión del hardware: Revisión que corresponde al hardware electrónico del dispositivo de campo. R Unsigned 2048
physical_signaling_code 00AB Physicl signl code Physical Signaling Code- The Physical Signaling Code describes the type of Physical Layer that has been implemented in the hardware that is responsible for the HART Communication port R Enum 2048
device_flags 00A0 Dev flags Field Device Flags- Describes special features of the Field Device that affect the Data Link Layer R BitEnum 128
device_id 00A1 Dev id Field Device Identification- Uniquely identifies the Field Device when combined with the Manufacturer Identification and Device Type. Therefore, this variable cannot be modified by the Host user. R Unsigned 128
polling_address 00A2 Poll addr Polling Address- Address used by the Host to identify a Field Device, and changeable by the User to control: the Multidrop Mode for Analog Output 1), and the Analog Output Fixed Mode of Analog Output 1) W Unsigned 128
tag 00A3 Etiqueta Etiqueta: Texto asociado a la instalación del dispositivo de campo. El usuario puede usar este texto de cualquier manera. Un uso recomendado es como etiqueta única para una planta que se correlaciona con la etiqueta de dispositivo de campo: esquema de planta, o en un sistema de control. Esta variable también se usa como tipo de dirección de la capa de enlace de datos. R/W PackedAscii 2048
message 00A4 Mensaje Mensaje: Texto asociado al dispositivo de campo. El usuario puede usar este texto de cualquier manera. No hay ningún uso recomendado. R/W PackedAscii 2048
descriptor 00A5 Descriptor Descriptor- Text that is associated with the Field Device. This text can be used by the user in any way. There is no specific recommended use. R/W PackedAscii 2048
date 00A6 Fecha Fecha: Fecha del calendario gregoriano almacenada en el dispositivo de campo. El usuario puede usar esta fecha de cualquier manera. No hay ningún uso específico recomendado. R/W HartDate 2048
write_protect 00A7 Write protect Write Protect Mode- Indicates whether variables can be written to the Field Device, or whether commands that cause actions, to be performed in the Field Device, can or cannot occur. Depending on the Field Device, this is a mode that is controllable by the user, either via the Field Device hardware or the HART Protocol. R Enum 2048
private_label_distributor 00A8 Distribuidor Private Label Distributor- References the company that is responsible for the distribution of this Field Device to customers R Enum 2048
final_assembly_number 00A9 Final asmbly num Número de ensamblaje final: Número que se utiliza con fines de identificación y está asociado al dispositivo de campo en general. R/W Unsigned 2048
xmtr_specific_status_0 0FB5 Status group 1 Estado específico del dispositivo de campo Byte 1: Datos que tiene el estado del dispositivo de campo información relativa a: fallos/advertencias/estado de los procesos. R BitEnum 2051
xmtr_specific_status_1 0FB6 Status group 2 Estado específico del dispositivo de campo Byte 2: Datos que tiene el estado del dispositivo de campo información relativa a: fallos/advertencias/estado de los procesos. R BitEnum 2051
Name ID Label Description Type Access Class